Jump to content
SAU Community

1/4 Mile 300wrkw R33 Gts-t

Cliffo_rb26dett
 Share

Recommended Posts

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
300rwkw in a gts-t would pull away from a gtr pretty easily.. maybe not up to 100 but from a rolling start no probs (e.g. 2nd and up)

Cheers for that mate. the plan is to make it a relialble 300rwkw weapon!!!

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
hehe, thats it :D

20k adventure is 300rwkw (reliably) :D

And no, it wont catch a GTR if is standing/low speed start. Not a chance.

money is not a problem mate, but it will still be a weapon hey

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted

It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

I no wat ya sayin by imposing that question i meant a stock gtr, or 1 close to stock with a few mods, Wat turbo was he using?? that awsome power!!!

2rismo Grand Master

2rismo

Posted
Posted
It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

Sorry champ. If your mate's car made that power and only ran 11.8 on slicks then something is seriously wrong. What was the mph?

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
Agreed.

300rwkw is low-11's at the least on slicks. I'd be more inclined to aim for high 10s

I was thinkin low to mid 11's too, could a GT 3040 push me down the quater with 300rwkw??

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted
I no wat ya sayin by imposing that question i meant a stock gtr, or 1 close to stock with a few mods, Wat turbo was he using?? that awsome power!!!

I dont know full details of the car but its been at WSID a few times lately, last time I saw him there he snapped a drive shaft. Maroan R33 GTST, I know he has a greddy plemium, 1000cc inj, power fc, forged internals, boost controler, and you probably wont believe this (nobody does) but he is using a $400 full ceramic turbo that he bought off ebay, I only know that its a top mount and its quite large. He says that it makes 310rwkw, I havnt seen the papers, But I was there and watched it do an 11.8 q/m so I know it does the times.

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted
Sorry champ. If your mate's car made that power and only ran 11.8 on slicks then something is seriously wrong. What was the mph?

Cant remember the mph, think it was in the 120s though, Look I know this guy through a mate and we went to the runs together a few times. I am only stating what times he did and what power he said it made as an indication to the author of this thread, if it is a shit time for that power level then maybe it doesnt make that much power, I dont know??? But I think that thats pretty awesome for a backyard build on a gtst.

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
I dont know full details of the car but its been at WSID a few times lately, last time I saw him there he snapped a drive shaft. Maroan R33 GTST, I know he has a greddy plemium, 1000cc inj, power fc, forged internals, boost controler, and you probably wont believe this (nobody does) but he is using a $400 full ceramic turbo that he bought off ebay, I only know that its a top mount and its quite large. He says that it makes 310rwkw, I havnt seen the papers, But I was there and watched it do an 11.8 q/m so I know it does the times.

CERAMIC TURBO!!!!!! thats insane, ebay does wonder's hey. Cheers tho, an 11 second street car is wat i am chasing. You would think it would crack! the turbo i mean, with that power.

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted
Agreed.

300rwkw is low-11's at the least on slicks. I'd be more inclined to aim for high 10s

I think your being abit optimistic, again remember these are street cars with average drivers, maybe if it was a fully set up drag car, with all suspension and proper tyres and gutted interior this might be achieved. He was running slicks but no doubt they were the cheapest second hand set he could get his hands on. I should also add that the 11.8 pass was with massive wheelspin off the line. ANyway its an indication, I think if you are building a car you should look at the worst it should do and if you do better you will be happy, If the author of this thread goes to the track aiming for a high 11s pass and gets a low 11 he will be happy. If he goes aiming for a 10 and has a few bad runs and cant better a 12 then he will have the shits.there is too many vairables to say what it will run but I believe that on a street car that is used everyday an 11s pass is awesome. Thats my 2c

IDO 11S R32 Collaborator

IDO 11S R32

Posted
Posted
CERAMIC TURBO!!!!!! thats insane, ebay does wonder's hey. Cheers tho, an 11 second street car is wat i am chasing. You would think it would crack! the turbo i mean, with that power.

Thats what we are all waiting for! I mean surely it cant last! But it is still going, I'll let you know if it lets go. I think if you get 300rwkw you shuld be able to get into the 11s but you have to be hard on the car, thats why he broke the drive shaft, snapped it clean. But I think at that power level 10s is abit optimistic, but 11s is achievable.

Cliffo_rb26dett Enthusiast

Cliffo_rb26dett

Posted
  • Author
Posted
Thats what we are all waiting for! I mean surely it cant last! But it is still going, I'll let you know if it lets go. I think if you get 300rwkw you shuld be able to get into the 11s but you have to be hard on the car, thats why he broke the drive shaft, snapped it clean. But I think at that power level 10s is abit optimistic, but 11s is achievable.

Snaped clean sh it hey, cheers for that mate let us know if it does crack...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...