Jump to content
SAU Community

Recommended Posts

oh and just to clarify this is in ireland and its not illegal to do it.

I've read some topics on it and see that some put a straight pipe through, my question is if i undo the exhaust on one side of the cat and drop it, can i just poke out the cat,and then just empty all the bits out.

im not sure about urs, but the last cat i saw to get gutted we had to bash it out!! not just "poke out the insides"

it would be ALOT easier to just drop the cat right out and do it. but better still...just buy a straight through pipe... OR better again... just buy a proper highflow cat...haha

CJ

I did mine a while ago on my old 33, its a bit of a bastard to get all the crap out, took me at least 2 hours, lots of drilling bashing and swearing but it did work, sounded better and spat flames after wards so all worth it if you've got a spare couple of hours, oh and don't forget you might need to borrow one come MOT time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...