Jump to content
SAU Community

Recommended Posts

Hey guys, my GTR which is pretty much stock (including ECU) will start fine when its dead cold and it runs perfect for like 10 mins.

once it gets up to normal temp it just stall itself and wont start again untill its been left overnight and gone cold again.

the only thing that has been done to its is last month i had my surge tank and 044 installed ready for new injectors and ECU and tune up..but it was running fine with that installed for weeks.

im not really sure at all whats causing it, but my guesses so far have been perhaps AFM, Coil Packs, water temp sensor, igniter module getting too hot, maybe is it possible fuel lines are getting too hot and creating vapour lock in the rail.?

at the moment the car is left sitting in the car wash down the road from my house until i can arrange to get it moved or fixed.

and help would be much appriciated.!

thankyou :nyaanyaa:

Link to comment
https://www.sau.com.au/forums/topic/190535-r32-gtr-stalling-then-not-starting/
Share on other sites

The ignitor modules are becoming notorious for failing with age and heat. When the engine stops, try chilling the ignitor somehow, see if the engine will re-start (maybe even try with bonnet up).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...