Jump to content
SAU Community

Recommended Posts

18" brakes? get the tape measure out, you need to run std size wheels in Targa. Don't think 16" wheels would fit. :-)

:D i wasn't going to say anything about the brakes or the fact that the suspension set up would be illegal as well (unless its just the TEIN set up)

Either way a built GTR is always nice to see on the road, sounds like there not taking any chances with a new motor/box :/

32 GTR price $12000 - $200 000+

Its not the JIGSAW racing 32 is it Skip???

Link to comment
https://www.sau.com.au/forums/topic/190718-r32-gtr/#findComment-3435431
Share on other sites

I thought jigsaw racing's was a R33? Targa will only let you have adjustible dampers, averything elce must be stock (even hicas :/ ). And this year you were allowed to run option sized wheels (18x9 on R32, and 18x10 R33) but that rule might be getting reversed.

Is it matt's blue R32?

Link to comment
https://www.sau.com.au/forums/topic/190718-r32-gtr/#findComment-3435539
Share on other sites

I thought jigsaw racing's was a R33? Targa will only let you have adjustible dampers, averything elce must be stock (even hicas :D ). And this year you were allowed to run option sized wheels (18x9 on R32, and 18x10 R33) but that rule might be getting reversed.

Is it matt's blue R32?

The V-spec GTR is 33 but there is also a 32 GTR getting around with the JIGSAW Racing sticker.

Rickard's was running a single set up or has he changed again???

I doubt he would take it to a local servo anyhow unless it was to get a wheel alignment or something along those lines.

Hopefully Benno can post up about the wheels and ruling for TT08...

Im still trying to picture 18" brakes and the wheels you would need to clear them :/

Link to comment
https://www.sau.com.au/forums/topic/190718-r32-gtr/#findComment-3435611
Share on other sites

If the work shop is in kingston, its Matts Blue GTR and all they are doing is just putting the engine in its really a RacePace built car!

Ah that makes sense then, will be good to see it back in action again as its been off the road for a while (longer than mine :spank: )

Did he stick with the single or go back to twin set up again Ray???

Link to comment
https://www.sau.com.au/forums/topic/190718-r32-gtr/#findComment-3436824
Share on other sites

  • 1 month later...
Optional wheels sizes will be OK for TT08.

R33 can contuine with 18x10, R32 17x9 or 18x9.

Yeah you can run them but you can bet onyone who does is either slow or has illegal diffs.

(Not that anyonew seems to check!)

An R33 with tarmac rally legal engine gearbox is etc is not goiung to pull 18 x 10s.

Link to comment
https://www.sau.com.au/forums/topic/190718-r32-gtr/#findComment-3500342
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...