Jump to content
SAU Community

Skyline Workshops

cactu5

By cactu5,
in Australian Capital Territory

 Share

Recommended Posts

a20089 Veteran

a20089

Posted
Posted
Mind you someone down here had a bad experience with CRD so it just shows that even the “best” can slip up.

Yep and that's still ongoing.

From several people I've been told similar stories as well. I had some limited but decent service from Jim who runs the place, but the fellow on the desk and who booked in the job lied to me about several things and is still screwing me around. The list keeps growing of things Croydon did or did not the more I look at the car.

I will take one thing back, the fuel econemy problem turned out to be a Woolworths/Caltex problem not the tune (after Jim said all 98's were the same mind you). But as some you you have seen, the shit comming from the exhaust is still there, if less so with the BP fuel.

Every time I take the car to Sydney to fix things (that never seem to get done when I arrive) it costs me about $120 in fuel and all my day. Just factor that in when considering taking your car to a Syndey or Melbourne workshop. CRD has been surprised that I will not go away, others I have talked to just give up trying to get service, but thats not my style.

Jim seems to be a good tuner, it's the rest of the service I am very unhappy about.

Don't piss of a public servant.

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Scooby Veteran

Scooby

Posted
Posted (edited)

I used to go to a well known workshop in Sydney - not CRD. It was a logistic nightmare AND $100 bills seemed to fly from my pocket everytime I walked through the front door. But I persisted because I thought it was worth it. As Borat would say...NAAAAHT! There was the rebuilt and re-rebuilt gearbox that saw the car there for close to two months the second time. When I picked it up after the second rebuild I said "so how does it feel?" and I got the response "oh, still a bit notchy". WTF???!!! Then I get a bill for a conversion to R33 GTR internals, which I didn't ask for, and the owner says it's a mistake he'll take care of it. Box still notchy so I go to see gearbox place that the rebuild was subbied to - another bloody trip to Sydney - who tells me not to use synth oil. Hmmm workshop sold me $50 of friction modifier prior to first rebuild because they thought it might help. Workshop owner's wife turns up at gearbox place (thanks gearbox place people) and wants to tackle me about unpaid bills etc - guess what, it's for the R33 GTR internals. I end up going to the workshop to sort this out where I get very warmly received amid much apology re the bill. And then there were the two times that I specifically asked for the FMIC pipe to be put on a certain way so it didn't rub against the front AFM. In the end it was easier to just get the thing home and change it myself.

I came to the conclusion that they were most interested in people who just pay endlessly without questioning things, and the crap off handed service I received from them was just bloody awful. I guess they thought that I was a bit particular and therefore too much like hard work. So...be warned about going to the supposedly "better'' Sydney workshops, a lot of them are just good salesmen. Sadly the place I was burnt by was probably better than many, but not as good as some local people who are also a hell of a lot easier to deal with and get the car to.

Edited by Scooby
datto260Z Experienced

datto260Z

Posted
Posted
Maybe when you speak to Pete you could find out for sure if the AE86 problems were really Ed's fault? I accept you're not saying that is the case, but there is a strong implication and I don't think it would be fair to let that stand if it's not the case. As we all know Ed and Pete are in the difficult position of having to deal with a lot of modified cars that customers bring to them to sort out; many I've seen are just a dog's breakfast, although I'm not suggesting the particular AE86 falls into that category. It's a risky business as people sometimes expect miracles and Ed and Pete are only human.

Regards

Im not going to have a go at anyone here and I really dont want to insult Ed because he seems like a genuine decent bloke, but when it comes to my car, I simply just want it done right. I do know the full details of what went wrong and they have fixed the problems, but 2 blown engines later. He just seems to have a bad karma hanging around and I dont want to risk it. But I know these arnt the only problems around from both current and previous businesses. Anyways, all in all, I cant say that he wont do a good job on others cars, but just not going to risk it.

datto260Z Experienced

datto260Z

Posted
Posted
How do we find jake for tuning?

I have my car that needs a tune and i was thinking going to jake. Whats peoples thoughts?

Shit attitude, rip off, piece of shit. But I know some people have had good experiences with him, just not me. I despise him.

datto260Z Experienced

datto260Z

Posted
Posted

Nah, I had nothing to do with that. He just charged me a lot more than he quoted me and then a lot of the work was really dodgy, like lots of pin holes in welds on my intercooler piping etc

Basically in an article in a newspaper about his workshop, he wrote that pretty much all of his customers were street racers, so the police went to every customers cars and screwed them however they could. Well pretty much, i dont know all of it.

a20089 Veteran

a20089

Posted
Posted
Basically in an article in a newspaper about his workshop, he wrote that pretty much all of his customers were street racers, so the police went to every customers cars and screwed them however they could. Well pretty much, i dont know all of it.

I'm not having a go asI was interested in the quote as well, but I think we should keep this to peoples direct personal experiances, not hersay.

I'd really like to know if more than one person has had experiance with "Skyline Performance" (http://www.gtr.net.au/). The website is one of the better designed ones I've seen for a car workshop.

NAman Collaborator

NAman

Posted
Posted
Just spoke to Joe at Skyline performance. They mostly just do engines these days for the GTR.

Currently working from home (not in Charnwood anymore) and looking to open a business again.

Seems a nice fellow.

Does he do normal servicing?

I need a new place instead of integra

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • Kapr
      Freddy Plenum vs Genuine options RB25

      By Kapr · Posted

      @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Dose Pipe Sutututu
      Neil's R33 Gts-t Build

      By Dose Pipe Sutututu · Posted

      Holy shit... wow!!! I totally missed this
    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...