Jump to content
SAU Community

Recommended Posts

well if you read the wheels mag they have the first excluseve on the new R35 GTR.

and i dont wont it.

a 60 deg v6 with 345kw

non etesa

non manual

looks like a commondore (imo)

non straight six

and is useing thermos from what i could gather from the eng bay pic.

i didn't read throught the full artical but apparatnly does 7.35sec min at nurburg (from memory)

any way gone is a true GTR

the new one is built for the street not the track (as drive (herald sun) reports)

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/
Share on other sites

well if you read the wheels mag they have the first excluseve on the new R35 GTR.

and i dont wont it.

a 60 deg v6 with 345kw

non etesa

non manual

looks like a commondore (imo)

non straight six

and is useing thermos from what i could gather from the eng bay pic.

i didn't read throught the full artical but apparatnly does 7.35sec min at nurburg (from memory)

any way gone is a true GTR

the new one is built for the street not the track (as drive (herald sun) reports)

gone is the true GTR ??

show me a stock 34 do 0 - 100 in 3.6 secs lol, or even do a 7.38 at the Nurburgring for that matter, This wll never take the place of GTRs gone in my mind, but i wont discount it as a true GTR either, its HOT and flippen powerfull

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437149
Share on other sites

This wll never take the place of GTRs gone in my mind

why?

does it need to be 20 seconds slower around the 'ring, have a weaksauce oil supply system, and be cursed with 5/8ths of f**k-all low rpm torque to be 'the real deal' :spank:

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437159
Share on other sites

well it already has a much better lubrication system than the RB-series engines, forged pistons and has titanium conrods/valves standard

the only potential weak links are the block rigidity or (although unlikely) the head gasket design

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437172
Share on other sites

well if you read the wheels mag they have the first excluseve on the new R35 GTR.

and i dont wont it.

a 60 deg v6 with 345kw

non etesa

non manual

looks like a commondore (imo)

non straight six

and is useing thermos from what i could gather from the eng bay pic.

i didn't read throught the full artical but apparatnly does 7.35sec min at nurburg (from memory)

any way gone is a true GTR

the new one is built for the street not the track (as drive (herald sun) reports)

:spank:

It looks more like a 350Z, and the last I looked, that's not a Commodore.

Non manual? DSG is even better than manual -- true super-cars of the 21st century have all gone this way so why shouldn't Nissan?

No "etesa"? It has ATTESA E-TS all wheel drive.

It has 353kw and 588nm torque from a VR38DETT (3.8 litre twin turbo DOHC V6) engine; in my opinion, this will not only be "true" to the GT-R image, but will enhance it. Its going to be roughly half the price of a Porsche for the same performance around a track, to me that sounds exactly like what the next GT-R is and should be all about.

Edited by M34N
Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437173
Share on other sites

However much of a ball tearer this is, and however much I want it, i'll still always have a special place in my heart for the 'old skool' Japanese cars even if a lot of them had inherent faults from the factory :spank:

Edited by Yawn
Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437180
Share on other sites

actually if you think about it, every single GTR in Nissan's history has been a straight 6... the S20 in the C10 and C110, and the RB26 in the R32, R33 and R34.

I still say that the new GT-R is more Z than Skyline, just whoring on the heritage of the Skyline brand and icons.

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437197
Share on other sites

However much of a ball tearer this is, and however much I want it, i'll still always have a special place in my heart for the 'old skool' Japanese cars even if a lot of them had inherent faults from the factory biggrin.gif

same

but the world moves on- not many people here would think all that highly of the V8 type that just have to have a big Holley 850 carb and kettering distributor ignition system on their 351c.i pushrod valve bounce machine

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437200
Share on other sites

actually if you think about it, every single GTR in Nissan's history has been a straight 6... the S20 in the C10 and C110, and the RB26 in the R32, R33 and R34.

I still say that the new GT-R is more Z than Skyline, just whoring on the heritage of the Skyline brand and icons.

now there are only 2 manufacturers in the world making full-production I6 passenger cars: BMW and Ford

everyone else seems to have realized that you get better handling balance without 2 or 3 cylinders hanging forward of the front axle line

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437207
Share on other sites

now there are only 2 manufacturers in the world making full-production I6 passenger cars: BMW and Ford

actually BMW just ditched the I6 for a V8 in the 3 series last month.

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437220
Share on other sites

to the thread starter... have you read ANY of the threads in this section?? some of this shit has been confirmed for ages, thanks to people like justin (7tune.com)

and i read the whole article in wheels. 1) wheels=useless, 95% front cover holden, mag 2) they have on their front cover the INCORRECT power figure, nice work :spank: 3) In the contents pages, they call it a friggen Skyline GTR.

wheels=useless

the thing has OFFICIALLY been released, with full specs on the website and the god damn CEO himself giving the power figure, and they still get it wrong

idiots

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3437292
Share on other sites

i agree with the comments about it looking more like a 350Z. It's the front headlights. The skylines, Z's, and now GTR share VERY similar front end styling. That was the thing i hated the most about the 350Z when it first came out, but nissan seem to love that headlight design ;\

i agree with the above comment. it needs a squarer front end ;D

Link to comment
https://www.sau.com.au/forums/topic/190917-it-is-unleshed/#findComment-3438608
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • (Rb25det intake manifold) I’m having a hell of a time trying to find the full part or part number of this coolant hardline so far I was given these (Below) but they aren’t what I’m looking for and was told it’s the IAR or aac valve but that doesn’t seem to be it either. If someone could point me in the right direction it’d be greatly appreciated. Or if anyone has it for sale that’d be great too. I have recently purchased a greddy manifold and I can’t seem to find my old one to pull it off.  (Front Heater Return / Water Pipe (under intake): Primary part: 14053‑21U10 (front return pipe assembly for R33/R34 RB25DET) Alternative listing: 14053‑21U00 (same pipe, sometimes interchangeably referenced)   Heater Feed Pipe: Listed as 14075‑04U00 or feed-related variant 14053‑AG500)    
    • This sounds cool. But, as per usual, anything really complicated like that, that I take on, constitutes a steep learning curve that I never actually "learn". I just get it working, install it and start using it. Then, when it breaks a few months later, I've got no memory of what I did, how I did it, or even the bloody IP address I gave it. I'm having more or less exactly that problem right now. My Proxmox machine was discovered to be non-responsive, and the VMs on it were ditto. Power cycle it to a stream of loud Dell beep codes - which was unpopular at midnight, I can tell you. Move it to the lounge room so I can HDMI it to the TV for a screen, see the boot messages complaining about the /PVE/data having all sorts of LVM problems, saying it needs to be fixed manually. And I'm like....great. How am I going to work out what I need to do? At least it wasn't the stupid Silicon Power SSD shat itself. Mental note for all readers - DO NOT BUY SP SSDS! They are shit. I have had one take out an entire VM setup already, and this one could have done the same. Maybe it actually has. Cheap Chinesium shitbaskets. I won't cheap out again, even on play projects with no budget. Because my time budget having to fix shit is worth far more than the cost of proper parts.
    • I do typically agree. These days even the screens most people use have more of a boot time than the main device. However, I've seen an interesting use of the RPi in vehicle, however it involves effectively building your own OS and MBR, as then it boots up exceptionally quickly, as you don't have everything needing to start up, and you can then also run it up as an RTOS, while still having more compute than an Android can give for things like display, and processing. A very huge task that would be though for Duncan, I'm not sure that's his skill set (or Arduino programming and wiring) ha ha. If end goal is definitely just water cooling, Arduino would be the simpler setup especially for a rookie. If he wants extra display stuff though, bashing some code in Python on an RPi may be the better result for both systems.   Unfortunately the new device I'm building at work which runs a display, is too slow of a display for dashboard style purposes. More extreme low power, update only a couple of times a day type system
    • I don't like "actual computers" for in car use. They take time to boot up, have OS annoyances, and so on. Arduinos etc are ready to go a few seconds after power on, don't mind being agressively powere cycled, because everything is non-volatile, don't mind being shaken and stirred.
    • As Fred would tell us, it's all about interpreting the rules. It's not a water sprayer, it's a water mister... But everything else you've said, 100%! Even a raspberry Pi would be great, use HDMI out for a display, and add a raspberry Pi CANBus hat to read values out from the ECU.
×
×
  • Create New...