Jump to content
SAU Community

Recommended Posts

hi guys

my brakelight on the stock s2 wing blew so i've decided to pull it apart to see if i can repair it/use the LEDs for something else.

img0736br1.jpg

it wasnt actually very hard to dismantle, just needing a little tlc with a small flathead screwdriver in between the black and red bits. be careful cos its easy to chip/crack the red part. its lined with a little glue that you need to crack is all. be patient

the red part just lifts off and underneath is a long pcb with lots of leds screwed to the black plastic. there is also one resistor on top (same side as leds) and 12 underneath (See bottom pic). its set up so that there are 48 leds set in 12 parallell groups of 4 leds each, with one resistor per group. the resistor on top is set in series with each of these groups

img0739tc7.jpg

now when i pulled the red part off, it was pretty obvious which bit had failed. the resistor on top had been crisped (see pic). now my question is - does any one have a clue as to the value of this resistor? it looks like a very simple fix if it wasnt for this missing info. if its available in fast can someone pls look it up?

img0741sl6.jpg

this is mainly for my own info but i'll write up the rest when i get an answer. mebbe it can then be moved into the diy section? oh and better pics will be up tomorrow

Link to comment
https://www.sau.com.au/forums/topic/190944-r33-s2-brakelight-repair-diyhelp/
Share on other sites

  • 6 months later...

Just opened mine up and low-and-behold, mine had the same resistor blow-out but it has no identifiable markings (a small pile of green dust).

Does anyone know what resistor goes there?

BTW - When these WERE available, they were $500. I found 1 at a wreckers for $250...if we can figure this out, it'll be worth making it a sticky.

the resistor blew because you were riding the brakes. brakes just slow you down, what are you using them for?

sorry, don't have anything more constructive to add. I could pull apart my car and find out what value of resistor is in the tail light but I'd probably put a screwdriver through it in my current state :(

DONE!!!

Went to Jaycar and we did some testing. The guy figured that that particular resistor was probably a fusible resistor, designed to be the first thing to blow (rather than your LED's).

Anyway, bought the resistor's designated 'RR0524'. These are a 10 ohm resistor. For a brighter light, use 2 of these in parrallel or a single 5 ohm resistor. Unfortunately, I don't have anything to compare how bright the 10 ohm resisitor is as they havent worked since I got the car.

So there you go - $500 for a brand new one, $250 for a secondhand one, or 0.38c to repair your own....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...