Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

For all of the people that keep offering gtst's with a turbo and shocks I'm not interested as I already have a R32 gtr setup for track days. Not to be rude but to just to clear things up for some of you.

  • 2 weeks later...

Hey man, very interested...

Wondering if i could come down n have a look are u able to txt me your address...

0429093400

I'm free this weekend. im only on my P-Plates but i would love it as a project to have ready by the time im 21

Looks like a great buy...I'd love to 'restore' it as such, get it in mint cond interior and exterior

To pick it up i'd have to bring down a set of 17's ey?

Cheers

EDIT: Oh BTW im from Ballarat so not too far away

Edited by Brent_Ford
can we drive it on the road yet?

Probably not: No reg :P

I can't believe this hasn't been swept up yet :)

If i hadn't spent thousands on my gtst, i would have snapped this up in a blink.

Good luck with the sale mate!

It can be driven on the road but I would need temp reg and I'm not spending the money if your not interest so you should come and see the car if your serious and we can go from there. I can tell you now if you like the car I can garuntee it drives like new. So if you put a deposit on it I will get the temp reg and if your not happy I'll give it back to you only if you can fault the car in how it drives. I can tell you now after owning 3 gtr's with varying mods and age that it drives perfect.

New Price $19000 FIRM!! I need it out of my backyard. It was almost sold on the weekend but they couldn't get the money so come and grab a bargain. $21kish on the road. You can't go wrong

The car will now come with so 17*9 forged 3 peice rims with new tyres plus a RWC so all it will need is to be drive to vic roads or I can do it so you to get it reg'd in your name.

Cheers Allblitz. There is so much talk on this forum with no action.

omgg wdff!!!! thats a bargain seriously, if i didnt ave my gtr i would of ran or even if i had some cash on me i will just buy it, yous guys out there looking for a gtr yous are bloody crazy

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...