Jump to content
SAU Community

Recommended Posts

a 1993 R32 GTST 179000 on the dial Suspension was installed at 170000, engine was installed a 171000 as was the clutch, and the turbo has covered less than 2000 km

R33 RB25DET

20 thou oversize forged pistons

forged h beam rods

reconditioned (new springs valves ect) and lightly ported head

N1 oil and water pumps

ACL race bearings

Cometic metal head gasket

ARP head studs and rod bolts

R33 Gearbox

R33 Differential

Garrett GT3076R Turbo

Tomei Poncams

600cc injectors

Z32AFM

HKS Hyper 3.5" exhaust with custom front pipe

Splitfire Coil Packs

OSgiken TS2BD twin plate clutch rebuilt by NPC

C’s Short Shifter

GFB Stealth FX Blow off valve

Bosch 700hp rated fuel pump

Apexi Pod Filter

Apexi PowerFC

Greddy Profec B spec 2 Boost controller

Custom FMIC

Custom intake piping

Oil cooler and filter relocation kit

Suspension and Braking

HKS Hypermax 2 coil over suspension

Front and rear strut bars

B pillar Brace

After market sway bars

JIC adjustable castor rods

JIC adjustable upper arms

Whiteline Pineapples

R33 GTR Brembos with DBA 5000 rotors

Front: 17 X 8 wheels with 235/40 semislicks

Rear: 17 X 9 wheels with 255/40 semislicks

Exterior and interior

Full respray- Custom Blue

Genuine GTR Bonnet and Grill, Front bar, and rear spoiler

GTST Type M side skirts

GTST Type M rear pods

Genuine R32 GTR Front and Rear seats

Genuine R32 GTR Door trims

Genuine R32 GTR Headlights

Nismo Gearknob

Audio

DVD player with 4 inch screen

6.5" Jensons in the back and JL 6" Splits @ the front

Last tune was a very safe 260rwkw it was making 300rwkw previously but it was not safe, a safe 300rwkw is only a thicker head gasket away! At 260rwkw this thing still really hauls and handles beautifly too as it has that little bit of extra attention paid to the suspension

I am asking 24,000 neg. this price is mostly designed to ward off dreamers and tyre kickers, if you are interested we will talk! I have included a picture of the car with 18inch starcorp impuls, if the buyer perfers these wheels could go on the car instead as I still have them at home.

PM me to discuss the car. Hope to hear from you soon!

Andy

OFFERS AROUND 20K WILL GET YOU THIS CAR TODAY!!

post-21318-1193703070_thumb.jpg

post-21318-1193703223_thumb.jpg

post-21318-1193703242_thumb.jpg

post-21318-1193703254_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/191365-1993-r32-gtst-with-rb25/
Share on other sites

Thanks for the kind comments guys! It will be sad to see her go after all the blood sweat and tears but after the best part of 2 years i am ready for a change!

my kind of no bullshit car!

ive never seen it... shooooooooooow me.

you could but it and see it all the time :ninja: ha ha I will even give you a special members price :)

someone buy this car.....this is an awesomely kept and run car has everything you need and nothing to put in except fuel...

I have been in this car and its a wet dream on wheels.

  • 1 month later...


  • Similar Content

  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...