Jump to content
SAU Community

Recommended Posts

UPDATE:

After weeks of trying to find some rims that would suite the color and the lines of my car, i decided to settle for 18" Gravity Gullflame in Gold colour, 9.5" wide.

It's really essential for me to get the widest tyres available for a R33 GTST, so i was thinking 275's at the back and 245's at the front.

The 9.5" width rims come in these offsets: +15, +25 and +35

.. and the 8.5" width rims come in these: +25 and +35

Should I go both front and rear the same width rims? or Should i perhaps go 8.5" for fronts?

What is the ideal offset for front and rear wheels?

Do you think i could get same offset rims for front and rear on a gtst?

Help me plzzz..

Old post:

I've been lusting over these wheels lately, but can't seem to figure out what brand they are.

They can't be Wedsport SA-70's, although they look very much alike.

Can one one help me?

P1040489.jpg

P1040490.jpg

P1040493.jpg

Edited by Barbarian
Link to comment
https://www.sau.com.au/forums/topic/191751-what-are-these-wheels/
Share on other sites

Guys, another question.

What would be the best (like in that photos of Silvia above) for a R33, offset wise ?

The offset of the car above isn't THAT good. I mean it's got a wider body, but the wheels aren't close enough to the guards in my opinion. The front are alright though.

Try using this calculator mate.

http://www.1010tires.com/WheelOffsetCalculator.asp

Just experiment with different offsets and width to see how much the wheel comes out and see if there's enough room under your guards.

The offset of the car above isn't THAT good. I mean it's got a wider body, but the wheels aren't close enough to the guards in my opinion. The front are alright though.

Try using this calculator mate.

http://www.1010tires.com/WheelOffsetCalculator.asp

Just experiment with different offsets and width to see how much the wheel comes out and see if there's enough room under your guards.

Thanks adam, much appreciated

God bless :rofl:

Hi Adam

In my defense, those pics were taken when I had a set of Ikeya Formula rear lower control arms in place and before I had a chance to get it aligned. I've since fitted the stock rear lca's and sold the Ikeya Formula ones (overkill for a daily), and the offsets are much closer to perfection. See the pics on the following post for proof:

http://www.sillbeer.com/2007/10/sillbeer-r...ther-stuff.html

Note that there's too much camber on the passenger side as it's yet to have an alignment (which will be happening tomorrow).

Cheers

Brendan

The offset of the car above isn't THAT good. I mean it's got a wider body, but the wheels aren't close enough to the guards in my opinion. The front are alright though.

Try using this calculator mate.

http://www.1010tires.com/WheelOffsetCalculator.asp

Just experiment with different offsets and width to see how much the wheel comes out and see if there's enough room under your guards.

After weeks of trying to find some rims that would suite the color and the lines of my car, i decided to settle for 18" Gravity Gullflame in Gold colour, 9.5" wide.

It's really essential for me to get the widest tyres available for a R33 GTST, so i was thinking 275's at the back and 245's at the front.

The 9.5" width rims come in these offsets: +15, +25 and +35

.. and the 8.5" width rims come in these: +25 and +35

Should I go both front and rear the same width rims? or Should i perhaps go 8.5" for fronts?

What is the ideal offset for front and rear wheels?

Do you think i could get same offset rims for front and rear on a gtst?

Help me plzzz..

Hi Adam

In my defense, those pics were taken when I had a set of Ikeya Formula rear lower control arms in place and before I had a chance to get it aligned. I've since fitted the stock rear lca's and sold the Ikeya Formula ones (overkill for a daily), and the offsets are much closer to perfection. See the pics on the following post for proof:

http://www.sillbeer.com/2007/10/sillbeer-r...ther-stuff.html

Note that there's too much camber on the passenger side as it's yet to have an alignment (which will be happening tomorrow).

Cheers

Brendan

Sorry mate, I didn't mean to offend you in any way. Seeing that the car is used as a daily, I'm not surprised it doesn't have its tyres 2mm from the guards. :happy:

It's a beautiful car though mate. I'll be lucky if any of my car's will look like that. Take care of it.

Cheers

No wuckers mate. I was more surprised the many that putting the stock arms on would set the wheels up for almost perfect offset to the outside of the guards. But haveing said that, it means I can't lower it drastically without dialing a whole lot of camber in to tuck the top of the tyres under.

Cheers

Brendan

After weeks of trying to find some rims that would suite the color and the lines of my car, i decided to settle for 18" Gravity Gullflame in Gold colour, 9.5" wide.

It's really essential for me to get the widest tyres available for a R33 GTST, so i was thinking 275's at the back and 245's at the front.

The 9.5" width rims come in these offsets: +15, +25 and +35

.. and the 8.5" width rims come in these: +25 and +35

Should I go both front and rear the same width rims? or Should i perhaps go 8.5" for fronts?

What is the ideal offset for front and rear wheels?

Do you think i could get same offset rims for front and rear on a gtst?

Help me plzzz..

If I were you I would go with the 8.5" at the front and 9.5" in the rear. I wouldn't have a clue how much clearance there is between your wheels and your guards, but I can help you out if you can get me some information.

Your current wheel specs:

I'll need your, wheel width, offset, diameter, tyre width and profile.

Your new wheel:

Just give me your desired width for the front and back and I'll work out which offsets I'd recommend.

Also how much clearance there is between your WHEEL and your guards front and rear.

If you get me that information, I should be able to help you decide which offset to go with.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...