Jump to content
SAU Community

Built Rb26/30 Engine Package

nismomiles33
 Share

Recommended Posts

nismomiles33 Collaborator

nismomiles33

Posted
Posted (edited)

Item: RB26/30 Hybrid Engine

Age: Has been built for a year and half, traveled under 1500klms in the past year.

Condition: Excellent condition, can hear running in car and will be inspected and freshened on sale.

Price: $9500 negotiable depending on parts buyer does and does not want or need.

To Fit: (What car) Skyline, VL or whatever your imagine comes up with.. :w00t:

Location: Ballarat, Victoria

Contact: Miles 0414 224 905 or [email protected]

Comments: Looking to sell this engine currently in my R33 GTS-t as the car is hard to sell complete and I have new plans for it. It has basically the best of everything and no shortcuts have been taken in the build up of this engine. This engine would cost in excess of $18,000 to build. For $9,500 it will come fairly well complete to turn key eg.

-MSD ignition

-Microtech LTX12S

-Aftermarket Alloy Plenum,

-GCG/XTR T66/T04R turbo on stainless hi mount manifold w/ 48mm Turbosmart Pro Gate

-BDG External Oil Pump

-Trust Cams

-Aries pistons

-SCAT Roads etc etc for full list please see my car ad below.

ENGINE LIST

post-18047-1194010506_thumb.jpg

post-18047-1194010527_thumb.jpg

Edited by nismomiles33
Link to comment
https://www.sau.com.au/forums/topic/191943-built-rb2630-engine-package/
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted

interested in a trade for our setup? not interested in the ecu, turbo or weird plenum but will swap for the rest. Who built the engine?

nismomiles33 Collaborator

nismomiles33

Posted
  • Author
Posted
interested in a trade for our setup? not interested in the ecu, turbo or weird plenum but will swap for the rest. Who built the engine?

What is your setup? Weird plenum? May look different but 440rwkw I think it works.. Kaos Racing built it, Dalton Automotive tune it. Maybe interested in your engine, but if it's fresh out of a drift car I won't want a thrashed out RB. PM or call if you wish to discuss further. Thanks

nismomiles33 Collaborator

nismomiles33

Posted
  • Author
Posted
can i ask what motor your changing to, or what ur plans are?

Not sure exactly yet bro, I'm wanting to go twin turbo's but not sure what series engine. All depends if the complete car or the engine sells first, but definately twin's..

nismomiles33 Collaborator

nismomiles33

Posted
  • Author
Posted
hey mate so this is full motor 4 sale?? very interested just wondering wat box u had in it diff and computer cheers

Yeah complete motor mate, will be pretty much turn key. Standard gearbox and diff in R33 GTS-t. Runs Microtech LTX12S ECU.

nismomiles33 Collaborator

nismomiles33

Posted
  • Author
Posted
Does it come with a rb25 or rb26 sump?

Does it come with a wiring loom (if so, what type GTST/GTR)?

Will come with GTS-t loom, which has been altered over factory obviously as it runs Microtech. It has a RB25DET sump. Located in Ballarat Vic.

STATUS Grand Master

STATUS

Posted
Posted
What is your setup? Weird plenum? May look different but 440rwkw I think it works.. Kaos Racing built it, Dalton Automotive tune it. Maybe interested in your engine, but if it's fresh out of a drift car I won't want a thrashed out RB. PM or call if you wish to discuss further. Thanks

imagine what it would have made with something less agricultural, still keen on the rest of the setup though. i have our setup still running and will allow any test to be done on it or anyone to view it as i know it is perfect. interested in a straight swap (mine complete less intake manifold) for yours less intake manifold and turbo.

nismomiles33 Collaborator

nismomiles33

Posted
  • Author
Posted
imagine what it would have made with something less agricultural, still keen on the rest of the setup though. i have our setup still running and will allow any test to be done on it or anyone to view it as i know it is perfect. interested in a straight swap (mine complete less intake manifold) for yours less intake manifold and turbo.

Sorry not interested, for a straight swap I think i'll keep my "agricultural" RB...

YSR020 Proficient

YSR020

Posted
Posted
Sorry not interested, for a straight swap I think i'll keep my "agricultural" RB...

:thumbsup:

Tough package, the torque would be phenomenal! Out of sheer curiousity, when does it make boost?

Good luck with the sale mate!

Cheers,

Chris

nismomiles33 Collaborator

nismomiles33

Posted
  • Author
Posted
:)

Tough package, the torque would be phenomenal! Out of sheer curiousity, when does it make boost?

Good luck with the sale mate!

Cheers,

Chris

Thanks Chris, depending on how much boost it's running alters when it comes on. The turbo on it isn't supposed to run below 18psi so anything under that it comes on around 4,000rpm, which is a bit laggy for general street work but I don't find it too bad at all, it's sorta worth the wait lol. Up the boost and the response becomes better and better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...