Jump to content
SAU Community

Recommended Posts

hi,I have just got myself a r32gts4 man.std but for 3inch ex,hks bov,k&n panel filter.want to upgrade,but have some questions,where to start?,i have Haltec interceptor,will this do the job? im guessing i/c,dump,ecu,injectors would be some of the first things to look at,so was hopeing for advice on where to start..stdRB20 5spd.cheers.$2000 to spend for now..

Edited by Jamie72
Link to comment
https://www.sau.com.au/forums/topic/192146-mods-for-r32gts4/
Share on other sites

Get yourself a front mount kit from just jap they seem to work fine, a good dump pipe if you dont allready have one, chuck the rubbish k&n filter in the bin keep the airbox just put in a BMC or APEXI panel filter a good boost controller preferably Electronic and closed loop (AVCR or HKS EVC) sell the interceptor and get full management of some form (cough power fc cough) the ecu is the key to so many doors, if i had my time again i would buy that first before anything else if your a newbie spend some time and research before you buy you will also learn heaps along the way.:) hope im a help of some form

Get yourself a front mount kit from just jap they seem to work fine, a good dump pipe if you dont allready have one, chuck the rubbish k&n filter in the bin keep the airbox just put in a BMC or APEXI panel filter a good boost controller preferably Electronic and closed loop (AVCR or HKS EVC) sell the interceptor and get full management of some form (cough power fc cough) the ecu is the key to so many doors, if i had my time again i would buy that first before anything else if your a newbie spend some time and research before you buy you will also learn heaps along the way. >_< hope im a help of some form

thanks ,that should point me in the right direction,got a blitz dual sbc,should be ok?

You can end up spending alot more than you would buying a real GTR as something worth keeping in mind.

If you want something fairly mild then;

* Exhaust is a good place to start (turbo back).

* Aftermarket ecu, sort timing and fuel out prefferably or S-AFC.

* Clutch and Flywheel upgrade will be needed once power is up , a lightweight flywheel while your at it.

* You will need fuel pump and injectors once you step into an upgraded turbo

Lots of things you can do really but, depends on what you would like the car to be.

If you want lots of power in the long term, just save for a built RB26 it more or less drops straight in with very few bits to get. The GTS4 gearbox is the same strength wise too, it's not the poxy RB20 box out of gtst's.

For the record the K&N panel filters are fine and re-usable, sorry 13thracer I've used exactly the same panel filter on a high powered GTR (among other cars) with more power than the lowly RB20 is ever going to produce. People only have issues with them when they don't read instructions and over oil them.

Have a good read of some of the links here:

http://www.skylinesaustralia.com/forums/t66556.html

Specifically this one:

http://www.skylinesaustralia.com/forums/t45218.html

Goes over the basic items for you.

Cheers

You can end up spending alot more than you would buying a real GTR as something worth keeping in mind.

If you want something fairly mild then;

* Exhaust is a good place to start (turbo back).

* Aftermarket ecu, sort timing and fuel out prefferably or S-AFC.

* Clutch and Flywheel upgrade will be needed once power is up , a lightweight flywheel while your at it.

* You will need fuel pump and injectors once you step into an upgraded turbo

Lots of things you can do really but, depends on what you would like the car to be.

If you want lots of power in the long term, just save for a built RB26 it more or less drops straight in with very few bits to get. The GTS4 gearbox is the same strength wise too, it's not the poxy RB20 box out of gtst's.

For the record the K&N panel filters are fine and re-usable, sorry 13thracer I've used exactly the same panel filter on a high powered GTR (among other cars) with more power than the lowly RB20 is ever going to produce. People only have issues with them when they don't read instructions and over oil them.

thanks for the great info.happy about the gearbox,definate bonus.and that i didnt waste my 90 bucks on the k&n :rofl: i`m thinking the power fc seems like the way to go.exhaust is 3inch from turbo back,has hks voltage stabiliser,...ps.will the apexi pfc work with my blitz dual solinoid b/c ?

as you may or may not know the gts4 is a bit heavy..i think as heavy as a gtr but it has the power of a gtst. Therefore making it a bit lighter would help to

here is a thread about making a r32 gts4 lighter i started a while ago

R32 GTS4 Lighter

hope it helps :P

weight reduction is good :D:):D:) dont quote me but from memory the oldschool drag racers used to say loosing 400 pounds is equal to adding 100 HP and the best thing about weight reduction less impact on your driveline and most of it is free.

Edited by 13thracer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...