Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

  • 1 month later...

So this arvo a mate and I went at it to try and put in my HKS Cams, HKS Cam Gears and Greddy Rocker Stoppers!

Before :

P1240257.jpg

And thats is it... there is no after cause we had to bail out, the cams I got came out of a Black Top SR with VCT, I was told that the cams should still fit in a Red Top SR but we cam across a slight problem. The cam bolt the bolts the cam gear onto the actual cam itself does not go in the cam due to the cams being specified to go into an SR20DET with VCT and the bolt is to big, So my question is can I retain the cams and use a cam bolt out of an VCT SR20 cut it down in size ( as they are longer to go through the VCT etc ) and bolt up my cam gear and put my cams in and done? Or do I have to get cams to suite Red Top only?

Bit of a bummer cause after cams were done everything else was going to follow and wiring also pretty much, now I have this problem... will be a pain to buy brand new cams when I had plans for other things.

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4389243
Share on other sites

No one wanted it so I kept the thing... still think i should of flogged it off... oh well. The Lobster was all done in Japan and came with the SR when I bought it but I eventually sold the FMIC kit off to make way for other things.

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4390424
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Blitz Top Rad Hose and Apexi EL2 Fuel and Oil Press Gauges

P1110257.jpg

CUSCO Rear Strut Brace

KTS Rear Sub Frame Brace

KTS Rear Camber Arms

KTS Rear Craddle Mounts

Silk Road Craddle Brace Kit

Kazama Rear Toe Arm Brace

Front Chassis To Front Reo Brace

BOSH 023 Fuel Pump

SARD Fuel Regulator

P1190261.jpg

More to come :P

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4453645
Share on other sites

  • 4 weeks later...

i have been doing research about dropping a sr20 into my track built r32 for a while.

i currently run a r32 rb25de + t and we decided to a ) wait untill that pops as its been going strong and B ) put a S14 black top in as they are a better motor but that makes the whole job more expensive.

i also have the D-Max rear boot spoiler and roof wing the roof wing is yet to be painted and fitted. fitment on both the items is spot on. you really do get what you pay for.

about the only thing i would change now would be the front bar as i find the GTR bar just doesnt match any other kits. i have a full GTR front end on mine and we fitted up a B&N kit and then took it back off. i have gone back to stock GTS-t side skirts as they match the look better.

also what is that very JDM looking part on the back of the bonnet? what is it called or who makes it ect?

sorry for crapping on its just this car is very similar to mine althoe mine is 2 door.

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4500158
Share on other sites

Nick, if you buy it, I'll bring it down to melb from brissy for you when I drive down... sometime, as long as you're not fussed on waiting for me to drive down (could be a month or so).

I gotta bring the ceffy down and bring the R32 up sometime soon once its out of the workshop.

Link to comment
https://www.sau.com.au/forums/topic/192746-jdm32/page/2/#findComment-4519840
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...