Jump to content
SAU Community

Recommended Posts

Ok everyone has be telling me for ages that my turbo can't be stock for the power it makes.

I just recently heard some strange noises from the turbo area and decided to pull it off. The rear housing is standard as is the turbine(48mm ceramic). The compressor is 49.5mm top and 64mm lower. I compared it to a VG30bb and the trim on the blades is also different. The compressor cover is also a 45V2 VG30bb unit with slight machining.

Can anyone tell me if the 45V4 rb25 compressor is the same dimentions as the Vg30 or More like mine???? meggala???

Would be good to work out if it has been modified, seems to work very well. If it does turn out to be non standard, I would think a VG30 comp cover and high flow wheel with the same trim would be a very cheap upgrade.

full boost by 2500 to 3000

218rwkw @1bar

225rwkw @1.1bar

I am having it rebuild with a larger VG30 exhaust housing. I will post the result next week after it's finished and dyno'd.

the car came over with a chipped computer and massive fuel filter-go figure. maybe it had a package deal done, I have seen the advertised by tuning shops in japan.

Link to comment
https://www.sau.com.au/forums/topic/19304-12sec-stock-turbo-secret-revealed/
Share on other sites

Boosted,

What other mods have you done my goal is around 230Kw at the wheels dont wanna go too far past this as i still want a daily driver and something reliable...

Just wanna know what i need to get it to that kinda power.. slowlu buiding up.. i'll prolly get there in about 10 years though.

paydro,

the kit cost me $400 out of the local trading post. Normally around $1400.

The car will run a high 12 without the Nitrous. Tyres permitting a low 12 with the switch flicked. after I set it up on 50hp a 100hp jet goes in and 11's are on.

sounds very cool to me.

im in the process of upgrading my standard r33 for 12 sec passes but i dont want to use nos yet i want to keep the internals stock as well but planning on using a apexi power fc and avcr boost controller with an obvious turbo upgrade or larger internals.

theres a few other things ive got inmind but ill se how this goes first.

but nos definatley sounds like fun.

p.s. good pick up on the nos

bump

drivebai, performance wise the car has a zaust, filter, cat in pipe, HKS EVC, Power FC, Cold air intake, Greddy front mount intercooler, oil/air seperator, octane booster for 12sec run and a HKS solid centre twin plate clutch. Also running 255 17" on the back.

bump

drivebai, performance wise the car has a zaust, filter, cat in pipe, HKS EVC, Power FC, Cold air intake, Greddy front mount intercooler, oil/air seperator, octane booster for 12sec run and a HKS solid centre twin plate clutch. Also running 255 17" on the back.

Boostd thanks man.. i have all those mods except for about 90% of them hehehe so it looks like i will need Power FC, front mount oil/air separator, and hi flow turbo.. basically i need all the expensive stuff... yeah i got 255 17" on the back as well man... I wish you were in Sydney dude.. cos you are pretty much where i am aiming for round 230rwkw... would have been good if you could have taken me for a spin in your car.. so i can see what 230rwkw feels like and compare the differences between my fairly stock crappy car!!!. then i would have more incentive to save.. hehehe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...