Jump to content
SAU Community

Recommended Posts

Just wondering if an r32 gtr will need a remap if i put 2 z32 afm's on it... If it won't then what about 1?

I'm planning on 350kw+- later on so don't want to have to get it tuned twice and will just replace the broken afm with a stock one if it will need to be tuned.. but would be handy if 1 z32 would run ok with the other stocker as it would save me $.. i have read that rb20/25's need to be remapped/chipped if u want to run z32's

cheers

Edited by GTAAAH
Link to comment
https://www.sau.com.au/forums/topic/193296-r32-gtr-1-stock-1-z32-afm/
Share on other sites

you wont be able to run one z32 and one normal GTR

the ecu will just give some screwey results and probably risk the engine

also the z32 is 80mm and GTR is 65mm so the piping etc wont mate up

the nismo afm's are a 65mm shell with z32 internals so you should go for these for ease of swap over

but you wont be able to run one nismo and one normal as the ecu won't know you have two different afms, the loads will be uneven

ah crap didn't know they had a different model afm, thought you just needed to adapt the inlet

So 2 z32 nismo afm's will run fine without a tune? Also.. they sound expensive is there a cheaper option i can run 350+- through?

the word Nismo scares me, don't want to pay $500 each for the afm's hehe..

Cheers

Edited by GTAAAH

nah u wont be able to run any afms other than the stock ones on the stock ecu either

only the stock ecu will support the stock afms unless you remap it or use a piggyback or stand alone

the nismo afm's should be able the same price as the z32's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...