Jump to content
SAU Community

Recommended Posts

Yes I would, how much cash? Condition of the turbo?

Here are some pics of the wheels. Size are 17 x 9 with 15 offset according to the inprint on the back. Inscription on hubs reads "Enkei- Racing -GTR R33-N1

post-16708-1198723835_thumb.jpg

post-16708-1198723930_thumb.jpg

Edited by m&m

They all need rebuilding, $300 a pair of $400 the lot. They were in the car when I bought it, I drove around for awhile but the knocking got to me so I invested in new ones.

  • 2 weeks later...
  • 2 weeks later...

I am going to pick up the HKS turbo's, front pipes,Apexi induction kit, oil cooler, OS Giken twin plate clutch now. I will be back home after 4.00pm.

I live in Frankston. To the 10 people that have inquired about the turbos and the dozen who have pm'ed me about the front pipes, first one there with cash or direct debit into my account, gets them. I have had a gutful of time wasters in the past.

Sorry for the delay, but Racingline have closed their doors and I had to wait for the owner to get back there so I could pick these parts up.

Again, I aplogize to all those that have sent pm's for keeping them waiting.

Markos....0404 453 542

Okay, I have all the parts here.

The HKS 2530 turbos are in good nick. The rear one has no shaft play and the front one has minimal, like 1-2mm.

The front pipes have no brand marking on them, they were on the car when it came from Japan. The car had an HKS exhaust, HKS dump pipes, so I assume they are also HKS.

I have sent pics to guy who is dead keen, but like I explained to him, first in with cash or direct debit gets them.

Here are the pics of the turbos, I will post up a pic of the pipes later.

post-16708-1201072545_thumb.jpg

post-16708-1201072597_thumb.jpg

post-16708-1201072644_thumb.jpg

post-16708-1201072679_thumb.jpg

post-16708-1201072735_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...