Jump to content
SAU Community

Recommended Posts

Hello from Canada.

I have a 92 gts-t and will be buying some 5zigen fno1r-c rims. I need help with offsets to have them fit as flush as possible. I also want the sunken look. Anyhow, I will be running an 8'' in the front and 9'' in the rear.

The available offsets are +15,+25, and +35 for the rear, and +25 ane +35 for the front. What will be the best with just rolled inner fenders, ideally I dont want to have to do any pulling. I dont plan to tuck the tires too much, but I do want to be fairly low. Oh, and I have tires already and the fronts are 215/45 and the rears aer 235/40 Federal ss595.

These are the rims in question.

5zigen-ucm.jpg

Thanks alot!

Edited by falcon
Link to comment
https://www.sau.com.au/forums/topic/193618-wheels-on-a-r32-gts-t/
Share on other sites

Ive heard that 17X9'' +25 will be fine on the rear, but will they not stick out too far on the front? And I dont think Ill be getting 9" on the front. Will 17X8 +35 be alright with a bit of a spacer?

ill gave a bit of camber too... 2 degrees maybee

Edited by falcon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...