Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I also run a trust with remote mount which i picked up second hand a couple of years back.

No thermostat on mine though. I have seen trust ones with thermostat if you want to go that way.

If you don't want a remote mount and want a thermostat i'd suggest hks. They have a kit that includes the thermostat in the sandwich plate and it's a very tidy solution. Just get a sandwich plate and buy the rest locally to save on mark up, or a second hand kit. Very cheap on yahoo.

VPW

Holley

SummitRacing

That part is Earls thermostat or "oil stat" - again available from the above links. Look around, you might find that you can order it cheaper from US rather then locally.

Look around, I considered the Pommy gear Aeroquip

aah thanks for that mate, wont be using a thermostat tho :wave:

I've run a SERCK core with earls fittings for years, and haven't run a thermostat.

car is 340+rwkw GTR32 and doesn't have any issues whatsoever getting oil to temp within 10 mins - even in winter in Melb.

still question if a gtr really needs a thermostat, when mine would stay open most of the time anyway...

Sounds like you're serious about protecting your investment.

None of the cheap kits around fitted my idea of rock solid, and the Jap ones are way over priced, carrying an insane amount of mark up.

I liked the look of a certain chunky CNC cut take off and adapter that I saw on full house drag cars, PAC cars, etc etc years ago. Took ages to find them, they're the same bits sold here

I grabbed the block take off and filter head from ARE plus a Earls -10 AN fitting for a pressure sender. I then picked the oil cooler of choice, few $100 bux of aircraft fittings later and some hose and hey presto! It's the most hardcore, solid solution I could think of.

I later found out, that Earls actually make the billet bits, so you can import em from the US for almost nothing with the way the Ozzi dollar is now :P

No way would I use a cheap $400 kit with the above available, I don't give a shite that people have been running em for years with no issues. Def a case of pay now, save later.

That kit picture listed there is from UAS who get their stuff from Motorsport connections in Seven hills - http://www.mscn.com.au/Scripts/default.asp - i bought pretty much what was in that kit, but substituted the Braided line for their Pushlock series of hose and fittings.

GTR1993 - 99% sure the rb26 runs a heat exchanger type oil cooler the same as the rb25's

Ronin, with out me going and checking does the gtr run a coolant to oil "cooler" that also helps warm the oil when cold from factory?

yeah it does - you mean a cooler circuit between the filter and block that feeds coolant around it?

post-1486-1195128583_thumb.jpg

Yea, this is what i think might be saving you from running a thermostat, technically you might gain something from still running one, but may not be worth it. If you were flat out in cold weather might pay to use one but not street driving.

I've run a SERCK core with earls fittings for years, and haven't run a thermostat.

car is 340+rwkw GTR32 and doesn't have any issues whatsoever getting oil to temp within 10 mins - even in winter in Melb.

still question if a gtr really needs a thermostat, when mine would stay open most of the time anyway...

So do you have a remote filter with your setup? I understand that the GTR runs coolant through the oil filter block in order to reach temp quicker, but would this work if you have a remote filter.

Im also looking at getting an Earls core with braided lines etc. Just wondering about the thermostat. Is it just one extra thing to go wrong?

Thanks,

Shaun.

Shaun,

yes, I run a remote filter, it's on the cross member (but sits a little low in my opinion).

it just bolts on to where the filter attaches - the water block still remains (as far as I know).. i'll have a better look tomorrow.

if you can, def get the remote filter - unless you have monkey hands (which i don't)!

agreed - thermo is one more thing that can go wrong, but i would guess that, like a water thermo, if it goes wrong it will stay open rather than closed?

Shaun,

yes, I run a remote filter, it's on the cross member (but sits a little low in my opinion).

it just bolts on to where the filter attaches - the water block still remains (as far as I know).. i'll have a better look tomorrow.

if you can, def get the remote filter - unless you have monkey hands (which i don't)!

agreed - thermo is one more thing that can go wrong, but i would guess that, like a water thermo, if it goes wrong it will stay open rather than closed?

oil thermos work on tha basis of when not up to temp, they bypass the cooler.

So it it got stuck closed - it would just mean the oil cooler isnt being used

stuck open means longer warm ups like you didnt have the thermostat.

so i cant see how it could damage anything if in the odd case it did malfunction.

Yeah, i just meant that an unbroken piece of hose will be more reliable than a piece of hose with a join in it. Does that make sense??

I had a bad experience with fittings once; cost me an engine. The fewer fittings the better i reckon. Having said that, i just had a look at the Earls catalogue, and ill definately be getting their thermostat. It looks the goods.

Shaun.

Dashmiester-got a deal through a friend, front mount with a relocation kit.

I know this is sort off topic but oil cooler/pump threads seem to have at least one tale of disaster that we can all learn from..unfortunately at someone elses expense. I would'nt build an engine without an accusump

Dashmiester-got a deal through a friend, front mount with a relocation kit.

I know this is sort off topic but oil cooler/pump threads seem to have at least one tale of disaster that we can all learn from..unfortunately at someone elses expense. I would'nt build an engine without an accusump

your link no worky

I had a bad experience with fittings once; cost me an engine. The fewer fittings the better i reckon. Having said that, i just had a look at the Earls catalog, and ill definitely be getting their thermostat. It looks the goods.

Shaun.

Loosing a motor is never a joke, but living with a scar that revolves around "using at little aircraft fittings as possible" is a little overboard i think. We aren't talking engine dampeners and Twister gale force, conical air filters. The automotive (incl HiPo automotive) industry rely on fittings at its core.

I would, as others, would eagerly benefit from more details on how a fitting hurt you, as a learning aid :(

Your right in being suspect bout a device that you add to something so vital, as your oil system, but rem Earls is a world leader in hardware. Proper multi million dollar racing portfolios rely on them, bread and butter. Plus, as mentioned, worst case it jams and you notice a oil temp raise from a gauge etc... and pull over.

Not to get all serious and shizzle, but gota judge things/events relatively.

LoL'flaps

Accusumps seem to wheezle their way into every discussion bout oil systems hahah

Brilliant idea, if you can find room to fit them... accept they add more "connections" to a setup, and hold dirty oil, when doing a change. (5000km changed should moot that point course)

Loosing a motor is never a joke, but living with a scar that revolves around "using at little aircraft fittings as possible" is a little overboard i think. We aren't talking engine dampeners and Twister gale force, conical air filters. The automotive (incl HiPo automotive) industry rely on fittings at its core.

I would, as others, would eagerly benefit from more details on how a fitting hurt you, as a learning aid :glare:

Your right in being suspect bout a device that you add to something so vital, as your oil system, but rem Earls is a world leader in hardware. Proper multi million dollar racing portfolios rely on them, bread and butter. Plus, as mentioned, worst case it jams and you notice a oil temp raise from a gauge etc... and pull over.

Not to get all serious and shizzle, but gota judge things/events relatively.

Im well aware of Earls' position in the marketplace, and as a motorsport supporter, i know that race teams use these (extremely expensive) fittings whenever a connection has to be made, but surely you'd agree that with an increase in the number of connections, the possibility of something going wrong (due to whatever reason) also increases. Whether it be failure due to incorrect installation etc etc. We're not all mechanics and mistakes will be made. Also, i dont know about you, but i have to consider the extra expense sometimes. Anyway, i think im splitting hairs and becoming too trivial. I was just trying to determine whether my car (a) needed a thermostat, (b) i wanted to spend the extra $165 for the unit plus about $150 on extra fittings, and © whether it was worth the added (minor) risk of something going wrong.

Regarding the engine failure; i bought a gtr engine for $6500 about 4 years ago, installed it in my gtst with a remote oil filter. I unfortunately used the Speedflow push on fittings with the rubber hose on the advice of a place in Newcastle. The car was on the road for about half a day before one of the fittings to the remote filter popped off and all the oil was pumped onto the road. Im still kicking myself for not noticing, but needless to say, i spun two bearings. For that reason, ill always use Earls threaded fittings with braided hose, and a dedicated oil pressure gauge.

Shaun.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...