Jump to content
SAU Community

Recommended Posts

No , he didnt build my engine.

The motor itself is stock.

The last compression test was perfect for all 6 cylinders done at manta racing.

This was one of the reasons that I changed workshops.

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

BDT(blackwood dyno tune) is where i take my GTR. couldnt be happier. i tryed a couple other BIG name places around adelaide and was NOT happy at all with them!!! all 3 on the south side of the city.

I forgot to mention that they put the wrong type of oil in the gearbox aswell.

Found out the last time I replaced the clutch. Havent told Mark about that though.

I forgot to mention that they put the wrong type of oil in the gearbox aswell.

Found out the last time I replaced the clutch. Havent told Mark about that though.

why dont you say something to him instead ove complaining on here so far they have been good to me have not had any dramars how can they knoe if something is not right when you dont speak upto your self not having a go but sick ove ppl complaining and not saying anything to there tunere you knoe WTF!

Did he build that engine? cos it sounds like you have excessive crankcase pressure due to poor ring seal. Your engine should not be blowing oil out the dipstick even it was left out.

As he said, it probably would depend how it was driven

why dont you say something to him instead ove complaining on here so far they have been good to me have not had any dramars how can they knoe if something is not right when you dont speak upto your self not having a go but sick ove ppl complaining and not saying anything to there tunere you knoe WTF!

As I said, dont take the car there anymore so no chance to tell Mark .

Besides I dont trust them anymore , would you?

You tell me what your thought's would be If you found out that , at $100 prhour, some tool put the wrong oil in you pride and joy , forgot the dipstick , lost my exhaust and didnt tell me and charged $480 for a part they didnt install.

Thats atleast 3 times stated that they stuffed up.

This car owes me $70,000+

And what do you think this thread was asking. derrr

Ya dipstick LOL

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...