Jump to content
SAU Community

Recommended Posts

iamhe77 is next (tomorrow)

At least I would have been if my damn Navi ROM had have co-operated...

I do believe that "pv35GT8" is very happy with his though. Thanks for your time though, Rianto.

Will talk again when I have ripped my Navi out and given it a damn good clean and check over...

Yeah Cam... I had a chat with Andy the lens probably need some TLC, most of the time disc cleaner brush is just not enough to clean it.

It's worth to have a map disk always in the drive, as it can reduce the amount of dust gathering over the lens over time when leaving the drive empty.

Yeah Cam... I had a chat with Andy the lens probably need some TLC, most of the time disc cleaner brush is just not enough to clean it.

It's worth to have a map disk always in the drive, as it can reduce the amount of dust gathering over the lens over time when leaving the drive empty.

I now have instructions on how to dissemble the unit and clean the lens of the laser. I will put together instructions tonight and send them to you both.

Cheers

Andy

I now have instructions on how to dissemble the unit and clean the lens of the laser. I will put together instructions tonight and send them to you both.

Cheers

Andy

Cool, thanks Andy.

Look forward to tearing the glovebox out (again) and possibly part of the dash.... no, not really.

excellent. perhaps an inclusion of how to drop the glovebox / tear up dash apart should be included for completeness sake?

Will post up pics on how to rip out the Navi ROM if I get time on the weekend (I can't find it with a quick look in the G35 manual)....

..... unless Chris wants to post some quick instructions

andy,

been busy :rant:

glovebox/ROM removal:

remove side trim

1 screw.

unclip lower trim panel - set aside.

lower inner corner of glovebox panel - 1 screw.

open glove box - 4 screws

crack glove box out

unclip light , push airbag connector to left - it will slip off the mount.

remove glovebox

remove visible screws under navi panel.

grab from left and GENTLY crack it out of place - get too rough and I'm not buying you another :(

unclip ETS box

2 screws in navi unit - remove

2 screws rear botton of navi unit - remove.

unplug/ remove unit.

NOW

if you are pulling apart a car I have done be careful as there are extra modules taped inthe the nav harness or around it.

for those that want the jap girl to talk again - not happening. that is a byproduct of the navi refit. some of the cars WILL talk regardless but 90% do not.

I sent them to your personal email address last night...... did you get it?????

can you send it to me as well please....buddy pal mate.

BTW...check out this.....pick the error's in what his saying...

Edited by Jetwreck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...