Jump to content
SAU Community

Recommended Posts

iamhe77 is next (tomorrow)

At least I would have been if my damn Navi ROM had have co-operated...

I do believe that "pv35GT8" is very happy with his though. Thanks for your time though, Rianto.

Will talk again when I have ripped my Navi out and given it a damn good clean and check over...

Yeah Cam... I had a chat with Andy the lens probably need some TLC, most of the time disc cleaner brush is just not enough to clean it.

It's worth to have a map disk always in the drive, as it can reduce the amount of dust gathering over the lens over time when leaving the drive empty.

Yeah Cam... I had a chat with Andy the lens probably need some TLC, most of the time disc cleaner brush is just not enough to clean it.

It's worth to have a map disk always in the drive, as it can reduce the amount of dust gathering over the lens over time when leaving the drive empty.

I now have instructions on how to dissemble the unit and clean the lens of the laser. I will put together instructions tonight and send them to you both.

Cheers

Andy

I now have instructions on how to dissemble the unit and clean the lens of the laser. I will put together instructions tonight and send them to you both.

Cheers

Andy

Cool, thanks Andy.

Look forward to tearing the glovebox out (again) and possibly part of the dash.... no, not really.

excellent. perhaps an inclusion of how to drop the glovebox / tear up dash apart should be included for completeness sake?

Will post up pics on how to rip out the Navi ROM if I get time on the weekend (I can't find it with a quick look in the G35 manual)....

..... unless Chris wants to post some quick instructions

andy,

been busy :rant:

glovebox/ROM removal:

remove side trim

1 screw.

unclip lower trim panel - set aside.

lower inner corner of glovebox panel - 1 screw.

open glove box - 4 screws

crack glove box out

unclip light , push airbag connector to left - it will slip off the mount.

remove glovebox

remove visible screws under navi panel.

grab from left and GENTLY crack it out of place - get too rough and I'm not buying you another :(

unclip ETS box

2 screws in navi unit - remove

2 screws rear botton of navi unit - remove.

unplug/ remove unit.

NOW

if you are pulling apart a car I have done be careful as there are extra modules taped inthe the nav harness or around it.

for those that want the jap girl to talk again - not happening. that is a byproduct of the navi refit. some of the cars WILL talk regardless but 90% do not.

I sent them to your personal email address last night...... did you get it?????

can you send it to me as well please....buddy pal mate.

BTW...check out this.....pick the error's in what his saying...

Edited by Jetwreck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Let large companies that are making money off selling kits do the preliminary engineering for you. If they all do -10, then that is all you'll ever need. 
    • Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
×
×
  • Create New...