Jump to content
SAU Community

Will 10.5" Wide Rims Fit At The Rear?

Al

By Al,
in Exterior & Interior Styling

 Share

Recommended Posts

Al Grand Master

Al

Posted
Posted

I am keen on buying new rims, but need to know what is the widest i can go.

I know that 19x9.5 will fit on the rear of my R33 GTST

But

The same rims also come in 19x10.5. Given the right offset, will these fit under the standard 33 GTST rear guards, without hitting/rubbing on any suspension components, inner guard, etc? If so; what is the right offset?

The height from center of hub to arch is 340mm (unloaded) and the guards have been previously rolled (not flared). I am NOT willing to make any more modifications to the guards, just want to know if 10.5" wide rims would bolt straight up, without any hassles. Obviously with 10.5" rims, i'll be running 275 or 285 tires.

Your help is appreciated

Link to comment
https://www.sau.com.au/forums/topic/194562-will-105-wide-rims-fit-at-the-rear/
Share on other sites
Weapon Mentor

Weapon

Posted
Posted (edited)

Maybe to close to call there, all depends on the offsets. I have 18x10's with a +22 offset i think and i need to get the guards slightly flared for them to fit under without munching the guards, so it will all depend on the offset dude... mine had 265's on them aswell

Edited by Weapon
n15m0 Grand Master

n15m0

Posted
Posted

even 9.5s are pushing it especially in 19s...10.5s no matter how you play with the offsets you may encounter scrubbing at either side...too low an offset will rub ur guards...to high an offset will probably rub ur suspension...

Weapon Mentor

Weapon

Posted
Posted
even 9.5s are pushing it especially in 19s...10.5s no matter how you play with the offsets you may encounter scrubbing at either side...too low an offset will rub ur guards...to high an offset will probably rub ur suspension...

Tis true, i have about an inch maybe more clearance between the coilover and the inside edge of my rim... but it also sticks outside the guards by that extra inch lol

Al Grand Master

Al

Posted
  • Author
Posted

Thanks all! Looks like i'll stick with 19x9.5 and 265 tyres.

why dont you want to work the guards ?? its cheap and easy!!

man up and do it.

I have a 3-layer pearl red paint job (similar to Candy Apple Red), and do not fancy respraying the whole car just for rims ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...