Jump to content
SAU Community

Recommended Posts

If you thought Electronic Blow Off Vavles were stupid then take a look at this :D:):D

96acura.jpg

  • 10hp gain at least or return it in 10 days for your money back!
  • The most powerful electric turbo available to the public
  • Dyno proven!
  • Easy to install
  • Up to 800 CFM per turbo and 2 PSI boost
  • Only 19 Amp draw @ 12 Volts
  • Cost up to thousands less than custom turbo/supercharger applications
  • Efficient centrifugal design

http://www.acturbo.com/index2.html

Link to comment
https://www.sau.com.au/forums/topic/19460-oh-my-god/
Share on other sites

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

I read a write up about the 'TURBO ZET' a while back, and it basically took the piss out of them big time....to cut a long story short it went about its argument scientifically, and arrived at the following conclusion....

"So, to supply the current to drive an electric supercharger having the same airflow output as the most energy-efficient type currently available, it would take 1000 amps. To generate this much electrical power would require at least 8 heavy-duty alternators bolted to the engine. "

The reaction of technical experts...."extreme mirth!"

Read about it at......

"http://www.autospeed.com.au/cms/article.html?&A=0237

Link to comment
https://www.sau.com.au/forums/topic/19460-oh-my-god/#findComment-410016
Share on other sites

Guest Chris Rodriguez

Well for on thing it's not a plastic fan. The blades are all aluminum. Second it's not like a Turbozet at all. That is obviously two small computer like fans. It's not eRam either. Both the TurboZet and eRam have inefficient axial designs. eRam actually states that there are problems with that. It does however increase the intake of air on vehicles. With 800 CFM it can provide more air than most vechicles usually draw [ (RPMs x Displacement in Cu. In)/3456 ]. One day someone had to come out with a more efficient electric supercharger and we have. A great company that tried to pioneer this was TurboDyne. They had a 3psi supercharger, but it required 100 amps and never was readily available to the public. Now we've just made the design better and made it available. If you have any questions I've left many forms of contact on my profile.

Link to comment
https://www.sau.com.au/forums/topic/19460-oh-my-god/#findComment-410836
Share on other sites

Guest Chris Rodriguez

I don't think this was every meant to be a replacement for a exhaust driven turbo. If you have that type of kit available then that would provide more boost of course. Not everyone has this option available and this is the main market we're catering to. People have purchased it though to minimize turbo lag.

Link to comment
https://www.sau.com.au/forums/topic/19460-oh-my-god/#findComment-410911
Share on other sites

Guest Chris Rodriguez

$350 USD for the single and $650 for the twin. The decrease in the twin is because you don't need another harness. We have a couple of companies (Summit Racing and Jegs) that are trying to get these in sometime in the future (Summit's ETA December). They aren't cheap to make and our molding company is trying to drive up the prices on us as we speak.

Link to comment
https://www.sau.com.au/forums/topic/19460-oh-my-god/#findComment-410939
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...