Jump to content
SAU Community

Recommended Posts

Everytime I do a highway drive longer than 100km... so steady speed of about 100km/h at a touch under 3000RPM... my gear shifter heats up like a mofo, to the point where the rubber guard that sits on top of the shifter has had to have been replaced twice in the last year as it just warps and oil splashes out. The gears also get harder to shift into when it gets really hot. Anyone got any idea what's goin on in there?

What's the temp its supposed to run? I was thinking of running a trans oil cooler of some sort to try and get the temp down a bit. Anyone got any recommendations?

Link to comment
https://www.sau.com.au/forums/topic/194664-r32-gtr-gearbox-running-wierdhot/
Share on other sites

ah crap... sorry... dextron 3 in the attesa system. castrol syntec 75W-90 in the gearbox :(

my bad typed the first thing on the receipt I had from the last fluid change.

funky you don't want dexron 3 in the attesa system either. you want nissan matic d in there, dexron 3 in the transfer case, and manual gear oil in the gearbox :w00t: (oh, but I don't think that has anything to do with your problem. regular ATF and nissan matic D are pretty much the same thing anyway).

I would possibly try changing to a better GB oil. We all know friction causes heat and low qual oil allows more friction. :rofl:

Just throwing out stupid ideas 1 and 2 for the day;

Your exhaust isn't resting against the box by any chance? You still have the heat sheild around the cat and your cruise mixtures are ok and not lean (causing excessive exhaust temp)?

Where does the gearstick sit in relation to the transfer case in a gtr? Could the problem be in the transfer case? is the attessa constantly slipping in regular driving? same size wheels front and rear?

richard... really? I've always used dexron 3 in the attesa... any harm in using it over nissan matic d?

yeah was considering trying redline, n seeing how it does. strange thing is I used to run the same oil in my old GTR and it didn't get that hot.

BHDave: cruise mixtures are around stoich, and exhaust isn't resting against the gearbox. no slip in attesa, same sized stock R32 GTR wheels front and back with the same sized tyres at the same pressure.

used to have an R32 GTR... sold that... got an R32 GTS4 now with a GTR gearbox and GTS4 gears. current car count is down to a respectable 3 :D

interesting.. that would be a patch remedy though... i'd rather sort the problem out. definitely will look into buying one of those if I can't sort this out buy changing OEM parts etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...