Jump to content
SAU Community

Recommended Posts

industrial truck cleaning cleaner called "RIP OFF" if you leave it on to long it will turn them yellow. Also use it on the paint work (quickly) all the bee stains, bird shits ect come off just with water. Again have to be quick otherwise i would have a pale yellow 33 :)

the only perk of work is the cleaning equipment

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489228
Share on other sites

don't use rip off on paints that don't have clear over them though (white, red) as it strips the polish.

but yeah rip off works killer on brake dust.. just don't leave it on the wheels as yeh it corrodes them. and high pressure hose at the carwash for example to rinse em.

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489266
Share on other sites

soapy water is what i use, have to be careful on what cleaning products you use with chrome wheels ect.

so i use soapy water...

i guy i knew bought a set of chrome wheels for his commy and the day he put them on he went to a car wash and used the high pressure washer and it took the protective layer over the chrome off which left yellow looking marks over the wheel. they were the BSA brand wheels, but this was a few years ago, wheels have come along way in quality.

Edited by 4drftn
Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489299
Share on other sites

if its just light dust from like 2 or 3 weeks of driving i usually use the TYRE CLEANER from happywash, you have to wait about 30 seconds before the real shit eventually comes out the nozzel but THAT combined with time washing the rest of the car and HIGH pressure rinse, they come up a treat... but most happywashes, dazzlers n shit never top the shit up so forget everything i just said LOL

For the older dust thats been on there for a while you should use some of that elbow grease, always works a treat.

Edited by Ryanrb25
Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489328
Share on other sites

soapy water is what i use, have to be careful on what cleaning products you use with chrome wheels ect.

so i use soapy water...

Couldnt recommend anything better, i just fill up a bucket of warm soapy water and wash away, bit of a nuisance washing the inside (anyone with impuls will agree) but completely white rims look nice. I used "Hot Rims" and it made my discs change to a dirty colour and started squealing after just getting them machined..

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489337
Share on other sites

thanks lads!

cos i have gheto spec rims that i painted with a couple cans of black spray paint, to minimise the paint chips n extra work respraying, im gonna try the hot soapy water and a kenco brush... elbow grease is probably the best option :)

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489340
Share on other sites

*waits for cara to say permaguard is the shit* lol

but yeah if crome make sure u get something that says crome safe. meguires have a wheel cleaner that is crome safe if needed.

soapy water and a chamois will do the trick.

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...