Jump to content
SAU Community

Recommended Posts

industrial truck cleaning cleaner called "RIP OFF" if you leave it on to long it will turn them yellow. Also use it on the paint work (quickly) all the bee stains, bird shits ect come off just with water. Again have to be quick otherwise i would have a pale yellow 33 :)

the only perk of work is the cleaning equipment

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489228
Share on other sites

don't use rip off on paints that don't have clear over them though (white, red) as it strips the polish.

but yeah rip off works killer on brake dust.. just don't leave it on the wheels as yeh it corrodes them. and high pressure hose at the carwash for example to rinse em.

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489266
Share on other sites

soapy water is what i use, have to be careful on what cleaning products you use with chrome wheels ect.

so i use soapy water...

i guy i knew bought a set of chrome wheels for his commy and the day he put them on he went to a car wash and used the high pressure washer and it took the protective layer over the chrome off which left yellow looking marks over the wheel. they were the BSA brand wheels, but this was a few years ago, wheels have come along way in quality.

Edited by 4drftn
Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489299
Share on other sites

if its just light dust from like 2 or 3 weeks of driving i usually use the TYRE CLEANER from happywash, you have to wait about 30 seconds before the real shit eventually comes out the nozzel but THAT combined with time washing the rest of the car and HIGH pressure rinse, they come up a treat... but most happywashes, dazzlers n shit never top the shit up so forget everything i just said LOL

For the older dust thats been on there for a while you should use some of that elbow grease, always works a treat.

Edited by Ryanrb25
Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489328
Share on other sites

soapy water is what i use, have to be careful on what cleaning products you use with chrome wheels ect.

so i use soapy water...

Couldnt recommend anything better, i just fill up a bucket of warm soapy water and wash away, bit of a nuisance washing the inside (anyone with impuls will agree) but completely white rims look nice. I used "Hot Rims" and it made my discs change to a dirty colour and started squealing after just getting them machined..

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489337
Share on other sites

thanks lads!

cos i have gheto spec rims that i painted with a couple cans of black spray paint, to minimise the paint chips n extra work respraying, im gonna try the hot soapy water and a kenco brush... elbow grease is probably the best option :)

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489340
Share on other sites

*waits for cara to say permaguard is the shit* lol

but yeah if crome make sure u get something that says crome safe. meguires have a wheel cleaner that is crome safe if needed.

soapy water and a chamois will do the trick.

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...