Jump to content
SAU Community

Recommended Posts

Hey Guys,

Has anyone used this mob for a vehicle inspection?

www.stateroads.com

This is the mechanical inspection they do, and they also do a body/chassis check which includes things like paint depth thickness to check for repraying, and an interior check as well.

Battery (condition Voltage test)

Alternator (belt condition/tension, charging)

Compression Test

Cooling Pressure & Co2 Test (Radiator, Water Pump, Heater and Cooling hoses)

Coolant recovery tank (condition, fluid level)

Water pump (noise / leaks)

Cooling fan operation

Power steering (fluid level, belt condition/tension)

AC compressor (proper cycling, belt condition/tension, Gas leakage)

A/C condenser (corrosion, road hazard damage)

Heater valve adjustment

Engine Valve noise

Fuel system operation (connections/leakage)

Valve stem condition

Engine & Transmission leaks

Engine/Transmission mount condition

Transfer case (housing cracks and leakage)

Brake master cylinder and booster (operation/leaks)

Tyres

Wheels/rims (Check for damage)

CV Joint/boots/drive-shaft/universal joint (cracks, leakage)

Differential (wear, whine, housing cracks and leakage)

Brake pad thickness

Brake rotor thickness and surface

Brake caliper leakage

Hydraulic hose/line leakage and free movement

Suspension (springs proper ride height)

McPherson strut/shock absorber leakage

Bushing condition

Ball joint and tie rod ends

Power steering rack leakage

Entire exhaust system (condition, leaks, damage, noise, catalytic converter and converter shield)

My dilema is, the car I want to get is in Qld, and is quite new 2004 V35 Coupe. Because it's a couple of hours out of Brissy, they want $450 for it.

Is it worth it for a newish car? If you've used them, any feedback?

Cheers - sorry for the long post.

Link to comment
https://www.sau.com.au/forums/topic/194920-wwwstateroadscom-car-inspections/
Share on other sites

Hey Guys,

Has anyone used this mob for a vehicle inspection?

www.stateroads.com

Entire exhaust system (condition, leaks, damage, noise, catalytic converter and converter shield)

My dilema is, the car I want to get is in Qld, and is quite new 2004 V35 Coupe. Because it's a couple of hours out of Brissy, they want $450 for it.

Is it worth it for a newish car? If you've used them, any feedback?

Yes I've used them for eactly the same reasons, long distance from any other area etc.

I found the engine inspections was good, but he said the interior was excellent when I considered it to be very average. The owner also said he seemed more interested in driving the car than inspecting it, but it was a GTR and the owner was an old guy who babyed it.

yeah i used em. seemed good.

Only reason why i didnt go through RACV is (becuase skylines an import) they have to take it to a cerified RACV service place for the day and do the inspection. Aparently they pull aprt stuff and ridicously check though it and it takes all day. Thats why i went with stateroads. Maybe not as detailed, but it was cheaper and efficient. (this is in MELB, dont know if it applies anywhere else)

good luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
×
×
  • Create New...