Jump to content
SAU Community

Winton Track Day - January 28th, 2008

BigDaddy

By BigDaddy,
in Archived Events

 Share

Recommended Posts

BigDaddy Enthusiast

BigDaddy

Posted
Posted

Just a heads up for everyone,

The next Tampered Motorsport Track Day will be on the Australia Day Public Holiday, Monday 28th January. The entries will be opening for this in the next couple of weeks once I finalise costs and things. This next one is going to be huge, the best yet. Once again all competitors will receive a Tampered Motorsport Gift at sign on.

Look forward to seeing you all there!!

Link to comment
https://www.sau.com.au/forums/topic/195349-winton-track-day-january-28th-2008/
Share on other sites
BigDaddy Enthusiast

BigDaddy

Posted
  • Author
Posted

Tampered Motorsport has another Track Day booked for the Australia Day Holiday, Monday 28th January, 2008. This time there is plenty of time to prepare so nobody has any excuses! :worship:

Entry Fee: $140 which includes Timing device hire.

Spectators are more than welcome, and there is no cost to come and watch. Also you can go for a ride in the cars but you must sign on with a Passenger indemnity first. Due to the amount of passengers at previous events our insurer has put a small levy on passengers of $10. You can just pay this when you sign the forms at the Scruitineering office.

YOU WILL NEED:

Long sleeve and long pants of non flammable materials i.e. No Nylon

AASA license which can be bought on the day for $50 or CAMS L2S (if you bought a license last time you don't need to this time)

Closed footwear

Helmet that complies to Australian Standards (has ASA or Snell Sticker)

Car needs to be in a good condition, no oil leaks, no loose items in the car and battery secure.

Good condition tyres

Working seatbelt (give it a pull and make sure it locks)

All people wishing to attend need to make payment to the specified bank account. When you send your email you will be sent an entry form as well as payment details. You will need to email the following details

Full Name

Address

Mobile Phone Number

Car Make

Model

Capacity

Previous best time at Winton (for grouping purposes)

Forum

and Forum Username or Nickname (for timing system)

SO IF YOU ARE INTERESTED EMAIL YOUR DETAILS TO

[email protected]

Merry Christmas to you all and see you in January!!

Adam

  • 3 weeks later...
  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...