Jump to content
SAU Community

Make Your Own Fibreglass Sub Box

jrocket

By jrocket,
in Fabrication

 Share

Recommended Posts

Craved Grand Master

Craved

Posted
Posted
yeh DIY an fab are pretty much the same thing anyway in some aspects, since he fabricated this himself :P, cant wait to get back to aus and start this and the false floor on my car

thats the idea :P

  • 3 weeks later...
  • 1 month later...
tefu Contributor

tefu

Posted
Posted

another thing to remember when masking it, start from the bottom to the top so you don't have any leak of FB, I put 2-3 masking tape on my boot before fibreglassing and chuck some plastic (bins or even normal plastic bags) to cover the rest of the area, the last thing that you want is to get FB all over your car body.

If you are making a flat surface FB, use a thin wood (from bunnings) to help shape it up and the rest leave it to the bog :)

  • 1 month later...
jrocket Proficient

jrocket

Posted
  • Author
Posted
how was the mould taken out, easy??

Sorry bout the late reply. Yeah it was easy to take out of the boot once i made it. But at the same time i did design the box with ease of removal in mind. Therefore i didn't mold it in any way that would make hard to get out once the fibreglass was hard. I mean like dont mold it around the back of the framework of the boot making it impossible to remove LOL. >_< But yeah dont need to be a scientist to work that one out.

When it was hard i just grabbed onto both edges of the fibreglass and gave it a good old yank. It came out with the cardboard and all still attached to it. I then just pulled all the tap and cardboard off the fibreglass mold which was fairly easy. Ofcourse my cardboard mold did get distroyed. With the first few layers of the mold done i just worked on it on the bench putting more layers on it and shapping it etc.

I think there is like a release wax or something that you can use also, which can help ya remove from boot etc. But yeah didn't care about the cardboard template so i just ripped it all out together.

Cheers

  • 2 weeks later...
3340TH Collaborator

3340TH

Posted
Posted

Think i might try this now....was just getting ready to start my boot, as the way it was set up b4 was a waste of space....cant be too much better as i have two 12" (alpine R)....wanna make as best as possible....where abouts do u get the fibreglass, from and how much do i need??? i bought a k and r touch up container, 500g for my bodykit and other little things but guessing this will not be enough, or is not the right stuff??

I will post up a photo of my fake floor this week (another idea if ppl want to try). I just used a big sheet of metal cut out to fit...is a little hard to get in but can be pulled in and out.

IDEA: I want to keep the spare tyre in the car, but noticed they not always gonna stay up and dont want to remove the stereo to pump up the tyre. So ive made this fake floor, but cut a hole in the metal where the valve is on the spare tyre. I carpeted right over the top of it and cut out a pizza shape (8 triangles) so once u pump up the tyre and pull out it falls back in place...but its not gonna bother anyway.

Put the two subs each side, mould them in NOW anyway :D Sit the boxes on the fake floor, and the distance between them will be a specific cut out between the subs to push them apart from to the wall; (fixing them, i believe this will be sufficent, correct me if im wrong)

The middle part will be mdf with a piece of stainless in the guts surround by carpet, will paint the alpine symbol on the stainless...for show reasons i guess.

So when i get a flat, unscrew the sub terminals, pull out the middle mdf, then the subs then the floor, then the tyre ;)

jrocket Proficient

jrocket

Posted
  • Author
Posted

I got my fibreglass from Bunnings Warehouse. But i think that boat places etc can sell it cheaper. Also you will use alot of resin. Get more than you think you need. I started it and thought i had enough and ran out. Such a pain in the ass too when you are in the middle of it all.

My box still allows for easy access to the spare wheel. Reason i picked the drivers side of the boot to install the box was bacause the Jack is on the other side. Didn't want to make to impossible to get the jack out when i need it. I will be making a fake floor etc too soon. Might start that this week as a matter of fact :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...