Jump to content
SAU Community

Recommended Posts

Snowie...but im guessing a constant 4wd car will always be better in the wet then something like a Porsche AWD or GTR AWD system that changes drive to front depending on traction, as this would change the dynamics of the chassis mid corner/sweeper. Compared to an EVO whjich is constant awd so a little more consistant in its handling, all that to go with all its electronic trickery

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I classify the R spec tyre being bad in the wet and being all or nothing on the limit as old wives tales. Plus the thing about them only working when they get heat into them. Even cold they're in a different league to street tyres. As a hillclimber I'm very accostumed to pushing hard on cold semi slicks. I've driven on alot of different brands and all have been good in the wet - certainly better than normal street tyres. Only ever an issue with standing pools or running water.

RE55S are great in the wet. I was fastest outright on one hillclimb on a set of RE55S in my GTR. admittedly they were brand new, but there was water literally running down the hills we were racing on!

Do you guys increase your tyre pressures before starting wet stages?

Being a Skyline owner that has hillclimbed (won the odd event), circuit raced (state series runner up) and tarmac rallied (decent pace), I disagree.

Most R tyres provide much less grip than a good road tyre in the wet.

R tyres provide little warning of apporaching their grip limit unless you have good experience using them.

Most R tyres do require heat to get up to peak operating condition, even reasonable operating condition... that said I have tried the RE55 in the super soft/hillclimb compound and they are magic first up, but goes to mush within 3.5km at pace so usless in a rally.

The RE55 is old tech now, the Dunlop DZ03 is full generation newer in dry and wet performance, but the Kuhmo V70A is considered to be one of the best performers on the market currently.

Being a Skyline owner that has hillclimbed (won the odd event), circuit raced (state series runner up) and tarmac rallied (decent pace), I disagree.

Most R tyres provide much less grip than a good road tyre in the wet.

R tyres provide little warning of apporaching their grip limit unless you have good experience using them.

Most R tyres do require heat to get up to peak operating condition, even reasonable operating condition... that said I have tried the RE55 in the super soft/hillclimb compound and they are magic first up, but goes to mush within 3.5km at pace so usless in a rally.

The RE55 is old tech now, the Dunlop DZ03 is full generation newer in dry and wet performance, but the Kuhmo V70A is considered to be one of the best performers on the market currently.

I guess you'll be using one of those "good road tyres" instead of semi slicks in the next cold wet Targa Tas then? You'll clean up!

BTW - I wasn't using the super soft WT compound RE55S - the 'S' is just the later version of the RE55, not a compound. I just had the normal medium compound that was the Saloon Car control tyre (225/50*16).

Edited by hrd-hr30

we had re55s in targa, even on sth riana where it started raining 1/2 way through the stage (tyres were nice and hot when we hit the rain) the grip was awful, latril grip was alright, but acceleration was crap, even pointing straight the car was snaking under acceleration. I dunno how the Dunlop shod cars found sth rianna?

Downright scary on 02G Dunlops Ben. Ecsta's the previous year however were awesome. Horses for courses I say. But as those involved know, one set must be chosen one day before you even run Prologue (qualifying).

And Stu, Kuhmo's are the last think you'd want to be stuck with in the dry now (** on a heavy car), much much slower that 03G's. But yeah, awesome wet tyre.

hrd-hr30 - if there was tollerance to run more than four tyres at the event a set of deciated of roadies like potenza re001 for 'wets' would be an great idea for the stages you could forsee as wet. the super soft re55 i tried were the first sets of re55 bridgestone sold in australia when bridgestone motorsport cocked up the order in '03 - five cars (three gtr, one 200sxr and one gtst) all killed a set each at symmons plains in a morning at a state series round. don't remember much about them but bridgestone supplied a replacment set a few months later when the mediums arrived.

marlin - the kuhmo's held up well on ayersies 33 in the dry with solid times (even when he only had 2WD), they will be perfect for the nice light 7 (if i ever get it back from yt!)

Stu, they'll be perfect for your 7 :P no doubt.

But I maintain they've been left behind in dry performance. We ran them on the 34 in 2006, and I don't think they would have got through if we weren't on badly cracked fron rotors from Cethana onwards, therefore cruising. Roseberry's surface just tore them to bits, in fact we were really worried they'd knock us at the lunch break tyre inspection!

After 2007's poor performance on 02G's, I was starting to think that maybe the Kuhmo's weren't too bad in the dry (if you could look after them), but after just doing Mt Buller and being able to run Kuhmo's and the new O3G's on TWO back to back runs, I'm sold on the Dunlops. 16klm stage, 16 second advantage exactly to Dunlops, twice.

(Not limited in tyre qty at Buller fortunately) The only question for me is wet weather, but seeing how badly smashed we were in the wet at Targa this year, anythings an improvement I say.

If my crystal ball told me that 5 days of Targa was going to be wet, I still reckon I'd run the Kuhmo's though :) .... maybe :)

kuhmos only start coming on when they look stuffed! magic or rx7, m3, gtst.

i've not driven on 03's yet, but 02's were a cut above at the time so stands to reason they would be better than current crop.

hrd-hr30 - if there was tollerance to run more than four tyres at the event a set of deciated of roadies like potenza re001 for 'wets' would be an great idea for the stages you could forsee as wet. the super soft re55 i tried were the first sets of re55 bridgestone sold in australia when bridgestone motorsport cocked up the order in '03 - five cars (three gtr, one 200sxr and one gtst) all killed a set each at symmons plains in a morning at a state series round. don't remember much about them but bridgestone supplied a replacment set a few months later when the mediums arrived.

marlin - the kuhmo's held up well on ayersies 33 in the dry with solid times (even when he only had 2WD), they will be perfect for the nice light 7 (if i ever get it back from yt!)

next time I do a wet event I'll bolt on my roadies just to demonstrate how much slower thay are. would have to be 2 sec per km conservatively. I can't believe people really think street tyres are better in the wet. Then again, I've met the odd bloke turn up at hillclimbs thinking their road tyres were the best thing to be on because "semi slicks won't get up to temperature".

My guess is you've never competed on a street tyre in any conditions?

Edited by hrd-hr30

I for one never claimed streeters were better in the wet. I don't think they are. R spec (and I haven't tried ALL brands) in my experience are much better once up to temp, assuming you can actually get them up.

On the flip-side of that, in my experience with a Kuhmo V70A will out-perform ANY tyre in the wet from cold, but you then run the risk running these in the dry and overheating them.

I said previously;

a. R spec tyres are commonly less forgiving at the limit of adhesion.

b. R spec tyres can be very inconsistent in their grip levels on changable surfaces.

c. R spec tyres can be very difficult to get up to temperature quickly in rain or very cold conditions (sometimes impossible to heat).

d. This attribute above gives R spec tyres little "feel" when cold.

Road legal tyres on the other hand are typically average performers at everything, but they're typically consistent at least, and that's something that's easy for Average Joe to become accustomed to.

Now, re-reading that, I don't disagree with everything you're saying, but I don't necessarily agree with everything either. The point I was really trying to make was that street tyres will typically be poorer all round performers in all conditions, but at least they are consistently poor, which may go some way toward slowing the field and helping inexperienced/occasional punters who aren't accustomed to R typre tyres. And mayyyyybe, thats a way to decrease accidents.

Edit: And yes, I've competed many times on street tyres in the wet, but only circuit sprints. And in that enviroment, give me R spec tyres any day.

Surely a lot of this discussion depends on exactly what brand/size tyre you're using, and of course every brand's differing tread block pattern/depth/width/pumping ability. Only have to look at an O2G beside a V70A to see which will fare better in wet conditions :banana:

Edited by Marlin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
×
×
  • Create New...