Jump to content
SAU Community

Recommended Posts

Well, I'm looking for another car to drive to work instead of bringing my R33...I dont know much about the R31, except that it's 3ltr engine. But can this car go hard? Or do u guys recommend any other old car besides this with cheap insurance?

Link to comment
https://www.sau.com.au/forums/topic/19575-a-r31-as-a-thrashing-car-d/
Share on other sites

It could go hard if you put an RB25DET head on it ;)

Seriously, they actually go pretty well with the SOHC head. They feel quite responsive around town and are fairly good on fuel consumption. Then again, my experience with one was back in the early 90s, so it was still newish. Not too sure how well they have held up over the years.

Yer, I used to own a 1986 R31 GXE for 2 years.. was the car before my R33..great.. make sure you get a GXE or Ti as it has all the options like aircon, power steering, etc. Has a bit of power, and can be modified a bit. They'll go harder than anything else under $4000 I'd say..

Insurance, not so cheap actually.. not as cheap as something else...of course not as bad as a turbo skyline, but i think it was around $400 full comp over 25, rating 1 for me.

Other suggestions include early Bluebird, early commodore (shudder), or something like a corolla or magna.

get the first of the twin cam corolla's.

the square ones.

86kw, light little car.

got no torque but loves to rev like all hell.

I loved that car..

very VERY reliable.

insurance is dirt cheap.

can pick up a good example (well as good as a 15 - 17 year old car can be.. 86 - 88 models) for under $4K

Originally posted by predator666

make sure you get a GXE or Ti as it has all the options like aircon, power steering, etc. Has a bit of power, and can be modified a bit.  

um, power steering is standard on all R31's. :mad:

Yes, they can go hard.

If you like manuals, then don't even bother with a Ti, because they only came out as autos.

They are easy to modify, and you get good power gains with minimal mods.

Ti and Silhouette both have factory mags and trip computers, and they are pretty good as far as fuel consumption goes.

Standard, you should average 450-500k's per tank.

I could go on all day, for more info, click the banner in my sig. ;)

Guest outlawskyline

The R31s go very well, i own one and have only a K&N and extractors and 2.5" exhaust, they are also very reliable, the real only things to look 4 is excessive noises in the gearbox and the diff- if its an LSD, which i think only the sillouhettes came out with, there is a supercharger kit available from Castlemaine Rod Shop, but the power steering pump gets in the way, not a big job to move it. I have a bad driving record and paying around 1100. I recommend them.

bah to supercharger. :P

For what it costs, it's much easier and cheaper to turbo the car, and ultimately you get more power with a turbo.

The supercharger dyno'd at 110kw... rather unimpressive in anyones books.

:blah:

Very reliable if you get one thats not about to fall apart.

Engine is the strong point.

Handling is the weak point.

Good pads and fluid and your brakes will be alright

Make sure its a manual, and watch the diff. A VERY sloppy/noisy one will probably need replacing. Most whine with some slop anyway.

You can get decent ones for under 4k.

Guest outlawskyline

I always thought that there was too much plumbing and fine tuning to run a turbo, u know anyone that does em? wot sort of cost? The r31 engine is a tough block and should handle it alright? I agree that 110kw isnt impressive but they are made to bolt on to a stock engine.

I use to have an R31, Skyline Silhouette. was the best car so much power i've heard of guys running turbo's on these cars and apparently you can get some good power out of them. the motors are very strong.

I've also owned 2 Twin Cam Corolla's 1986 Model, these cars are so much fun to drive i smashed through a bunch of parts though.. not the strongest of cars :D

R31, is my recommendation. but buy the Silhouette. better seats and other options :)

Hey guys im looking at doing the rb30/25 head in me r32. In one of the other posts I was stating to someone what I would be getting done.

Long story short, what would you think of an rb30 block, properly rebuilt using ACL bearings, honed, etc using standard pistons? Someone commented that this sounded like ya mommas VL engine rebuild. Do you agree?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
    • Ceste, jak se mas Marek...sorry I only have english keyboard. Are you a fan of Poland's greatest band ever?   
×
×
  • Create New...