Jump to content
SAU Community

New Exhaust System - Pics And Vid

Simon-S14

By Simon-S14,
in South Australia

 Share

Recommended Posts

Simon-S14 Grand Master

Simon-S14

Posted
Posted

Hey Guys, i thought i'd post up my new exhaust system that i got custom made from AM Performance here in Adelaide. Its a split dump with custom port divider to suit my 3071R, it also makes it impossible for the exhaust gases to leak out the screamer. This is a track car so we went all out on the design of the system, and the only compromise was the fact that the opening in the rear bumper wouldnt allow for the size twins that Andrew from AM wanted to run.

Its a 3 inch dump, going into a 4 inch exhaust with a resonator, then down twin 3 inch AM Performance Mufflers which have a ceramic packing, while they look like pipes they do have a large muffling effect. The end result is one hell of an awesome note from the exhaust, The idle sounds very "cammy" even tho i have stock cams, and it sounds great when you rev it, Its quite unlike any exhaust ive heard before on an RB and certainly sets it apart from all the generic Trust/HKS/Apexi exhaust out there.

Next step is intake pipe and tune then im all set for Drift Fest at Calder Park dec 16th. Anyway for now here are some pics and a vid, dont mind the smoke in the video i havent got the AFM pipe on properly so its mega mega rich.

I would like to take this opportunity to thank

-AM Performance

-GCG Turbos

-All Type Crash

-The Speed Lab

-Adelaide Jap

01122007353oe4.th.jpg

01122007348fb3.th.jpg

pb240007la5.th.jpg

pc010023lz4.th.jpg

pc010026yt8.th.jpg

pc010029dr8.th.jpg

pc010031rq3.th.jpg

01122007345ol8.th.jpg

01122007338cl5.th.jpg

Link to comment
https://www.sau.com.au/forums/topic/195972-new-exhaust-system-pics-and-vid/
Share on other sites
Simon-S14 Grand Master

Simon-S14

Posted
  • Author
Posted
Its ALIVE!!! :)

So hows it drive? :D

Keen to check out how it sounds in person. Has quite a nice roar!!

i wish i knew :( i took it for a drive up the street and back, but its got no rego so i didnt go far lol... didnt thrash it as the AFM pipe is dodgy and the tune isnt done yet, gotta finish the stainless afm pipe this week and get a tune.... looking forward to it tho! should go bloody hard!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...