Jump to content
SAU Community

***************r33 Stolen *************


Recommended Posts

Hey Guy's

My Brothers 2 door R33 Skyline got stolen :nyaanyaa: on Tuesday Night Wednesday morning around 4AM from West Richmond Area just off Marion Rd.

It is Black, with GTR Wing, sideskirts, rear spoiler, bonnet with the "backwards facing" scoops 3. 1 big on and 2 small ones either side. Blitz FMIC

19" Starcorp Mesh Rims and blue front calipers with shiny Nissan logo. Rims have scratches in the wheelnut recess's from being done up with a wheelbrace that had the chrome coming off!

The front the spoiler was down to the fiberglass cos he just fixed it so you can see where it was being touched up so a creamy colour instead of black.

Inside only has the 2 front seats in cos he was working on the interior.

Please can EVERYONE in adelaide keep an eye out for it cos I would like to get it home to him before christmas.

Pics will be up later tonight.

If you see it PM me or msg me on 0414060248.

Thankyou.

Cyra

picture00372xt5.jpg

Its This front spoiler but down to the fiberglass no black paint on it.

picture00371po1.jpg

picture00369uz7.jpg

Its This front spoiler but down to the fiberglass no black paint on it.

picture00369uz7.fff00ac8ec.jpg

picture00370sh8.jpg

picture00370sh8.3d95b2a783.jpg

Edited by Sheepish7
Link to comment
https://www.sau.com.au/forums/topic/196021-r33-stolen/
Share on other sites

I am on the road quite a lot, I will keep an eye out.

Good luck getting it back.

Thanks Guys,

Has been spotted cruising thursday n friday nights driving hard on Grange road heading towards the beach.

Still hasn't been found yet

Edited by Sheepish7
Link to comment
https://www.sau.com.au/forums/topic/196021-r33-stolen/#findComment-3509173
Share on other sites

Thanks Guys my Brother n I really appreciate it.

How it got stolen was someone broke into his house through the lounge room stole the keys out of his bedroom while he was sleeping, snuck out the back door and took off in the skyline. Its a pitty my brother is a heavy sleeper :)

Link to comment
https://www.sau.com.au/forums/topic/196021-r33-stolen/#findComment-3509417
Share on other sites

nah this is a different one steve!

nonetheless i will definitely keep an eye out for ya bud!

hope you get the car back in one piece.

dang wonder if its the same person that took yours... same method of entry

nice car....would definitely keep an eye out as i have been after that bonnet and that kit for a long time and never get an straight answer as to what kit people have....sorry to hear your loss

maybe if you see him ask if he would like to swap bonnets with a cash adjustment his way get his mobile number and where he lives to do a swap then... :D:)

Link to comment
https://www.sau.com.au/forums/topic/196021-r33-stolen/#findComment-3509623
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...