Jump to content
SAU Community

Recommended Posts

I finally got my S1 Stag today. It's taken a while!

Anyway, the leather seats won't move forward/back/up/down/around.

What should I be checking? I noticed in the fusebox that there is a fuse for the "Power Interior" or something. I've never seen a fuse like that before so I'll be hunting around for it this weekend I guess. Is there any wiring or anything obvious that I should be checking?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/196186-leather-seats-not-powered/
Share on other sites

if you have a multimeter, check there is power when ignition is on at the large white plug under the seats, its easy to spot. Not sure where the fuse is, but if neither seat is working it would be a good place to start

  • 2 weeks later...

The fuse is in the fuse box under the bonnet. It's a weird looking fuse.. Those square ones that are completely enclosed in plastic except for the base which is a "female" plug end.

I took it to the local parts place and they just gave me a blank stare. Any idea what stores to try for these fuses?

ummm you sure thats not a relay your looking at?

can you post up a pic?

and yeah.. one of the joys of owning an import .. getting parts is not always a straight forward affair

but .. keeps you entertained.. and when you find a good autoparts store stick to them

( shameless plug for Repco Vic Park in W.A ! )

The fuse is in the fuse box under the bonnet. It's a weird looking fuse.. Those square ones that are completely enclosed in plastic except for the base which is a "female" plug end.

I took it to the local parts place and they just gave me a blank stare. Any idea what stores to try for these fuses?

fuse_eg.jpg

I think it's the same as the 4,5,6 ones in that pic..

G`day try having look at maxima fuse`s,or have you tryed nissweck ???.or try putting fuse`s out of 4,5,or 6,into our seat spot`s see if that will give you power put seat in to position then put then back ?????GOOD LUCK,cheer`s chuckie

Morphett vale electrical have had a look over my Stagea once before, with a 4wd fuse blowing issue

they helped me out....

was able to source fuses thru him, he may be able to help if all else fails

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...