Jump to content
SAU Community

Recommended Posts

My R33 is getting terrible fuel economy of 190-250 with 50 city trafic 50% freeway (190 driving normal, 250 driving miss daisy the whole time), and its really starting to give me the shits. Car has usual 200rwkw mods runing a PFC tuned by RE Customs

What I have done so far:

Made sure it was not my driving

Checked accuracy of fuel guage and speedo

Replaced 02 sensor

Cleaned AAC valve

Cleaned AFM

Got RE Customs to make sure the tune was spot on, they said it is now perfect, they checked for fuel leaks and found none, they said it would not be the cat because car is not down on power at all and drives very well.

The only suggestion the had was an injector(s) could be leaking (they noted the idle is somewhat rough) and this could be causing the problem.

So does anyone have any suggestions as to what else might be causing this problem before i spend the time and money getting the injectors checked.

Cheers

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

try replacing the fuel filter aswell, i replaced different items every few thousand kms and noticed an increase in kms from a tank each time, now im getting between 600-700km (highway) consistently from a tank (mine is stock standard though). I replaced fuel filter, O2, air filter, cat (and exhaust), spark plugs and went from 350 to where i am now (600-700)

^^^ WTF would you do that for? Any problems that caused you to do those two things?

190-250 is terrible dude, bloody terrible. I have this feeling the problem will be a leaking injector, but to replace with stock seems like such a waste of $. and I dont have the cash for some 750cc's and a retune just at the moment.

Edited by stolen_s15

get the injectors ultrasonically cleaned would be my next move. I had mine done by a mobile injector cleaner goy, came around, took about 2 hours.

Edited by chook
get the injectors ultrasonically cleaned would be my next move. I had mine done by a mobile injector cleaner goy, came around, took about 2 hours.

I like that idea.

What was the cost mate? Do you know if they are able to give you a report on the flow of the injectors?

Cheers

*EDIT*

Seems that around $30 per injector on site is the going rate.

Edited by stolen_s15

As above, could be a faulty coolant temp sensor (tells the ecu to run rich until the car is warm)

Another possibly is check your brake drag (jack car up and spin wheels freely). Handbrake might of dropped a spring or maybe even ceased a caliper piston??? Both happened to my VL :P

Edited by Jmaac

Had same prob with my R33 GTST and turned out to be O2 sensor. Heres a couple more ideas:

Pull the spark plugs out.

If its running really rich they will look like they are really black and very sooty.

If they are ALL black then its not a leaking injector. Its more likely some sensor error or the ECU dumping fuel in for some reason.

If only ONE is black then look at that cylinder. You would notice a missfire on that cylinder.

If NONE of them are black and your getting bad economy then..... NO Idea.

BTW I had a missfire when the O2 sensor was dead. Missfired from running too rich. AFR's were 9.7 to 10.2 when cruise. 250ks to tank.

my pesonal experience is different. before i was getting 400+kms per tank. now ive replaced02 sensor and sparkies and im only getting 250-300ish!!!!

and still stock ecu etc.

Just finished a full tank after the ecu 'touch up' by RE customs. I manged to get 310km and 1/4 of that was done on the dyno, so it has made a decent improvement.

I CBF changing the fuel filter and checking the plugs the w/end but will do it next week and see what happens.

Nick

well i just got 675km (9.5L/100km) from that previous tank of petrol, that should be some incentive to stop being so lazy and change the filters ;)

Only just read then that yours is 200kw, mine is stock standard apart from the exhaust but that extra 50kw shouldn't cause that much different in fuel usage

well i just got 675km (9.5L/100km) from that previous tank of petrol, that should be some incentive to stop being so lazy and change the filters :/

Only just read then that yours is 200kw, mine is stock standard apart from the exhaust but that extra 50kw shouldn't cause that much different in fuel usage

Okay, but there is no way you have managed that in Melbourne peak hour traffic. I might drive my car to Sydney for Xmas, so I'll see if I can tailgate a truck the whole way and beat that figure :(

I will change the filters and plugs this week sometimes, I know I'm just being lazy. But after the work Xmas party Friday night I lost all enthusiasm do do anything but sleep it off!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...