Jump to content
SAU Community

  

68 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

hey guys,

looking at buying myself a skyline soonish....cant really decide what i want, 4 door or coupe :P

is there any difference between the coupe & 4 door besides the obvisous cosmetic differences?

i will be using it as a daily/drift hack....as i have another project on my hands atm

if you guys could recommend one to me & state why you would choose that one over the other one....hopefully this will help me make my decision

cheers

Andrew :P

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/
Share on other sites

There's nothing different apart from the obvious cosmetics. The suspension from a gtst coupe will go straight into a sedan. Engine are both the same. The sedan is an extra ~50mm longer.

I went for the sedan because I thought it was 'rare'.

It's your choice which one you should go for. Some people don't like the sedan's rear lights and it makes them want to go for the coupe.

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3514287
Share on other sites

It's your choice which one you should go for. Some people don't like the sedan's rear lights and it makes them want to go for the coupe.

umm i heard you can get coupe tail lights to fit into the 4 door, not sure if they fit straight in or u need a conversion kit....but this is possible yer??

also

is it possible to fit a tow bar on an r32 to tow a small trailer?? like a jet ski?

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3514824
Share on other sites

umm i heard you can get coupe tail lights to fit into the 4 door, not sure if they fit straight in or u need a conversion kit....but this is possible yer??

also

is it possible to fit a tow bar on an r32 to tow a small trailer?? like a jet ski?

You can get the covers to make the sedan's tail lights look like the coupe's, but actually changing them to coupe ones is a LOT of work.

I don't see why you can't put a towbar on the car, it's just that the 2ltr is already struggling with the 1.5tonne car.

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3514879
Share on other sites

4 door looks crap in comparison to the 2 door in my opinion.

I've had both and prefer the look of the 2 door.

however, if I ever get another, I would need the 4 door.

but if you need 4 doors, then might aswell get a skyline instead of a camry.

adam - R32 is closer to 1.3tonne.

gts4 is a GTR style 1450kg

now that is of the suck with an RB20

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3514921
Share on other sites

You might find that the 4 doors are a little cheaper for insurance with some companies, (maybe the only 89' 4 door skyline they have in there system is the R31), either that or there isn't as big a data set for 4 door imports as there is for 2 doors to base there stats on. (im sure somebody will correct me on this one, buts this is just my reasoning).

And if you park your car in a tight garage like i do its a hellava lot easier to get out of a four door with its shorter doors than a coupe, at least in my situation.

I may be wrong but you also sit a little higher in the 4 doors with factory seats, but you get shitty cloth instead of the velour in the coupes, unless it have a late model 4 door interior.

None of this will matter if you don't like the look of the sedan. I suppose its just personal choice.

If you using it for a drift hack its way easier to put tyres and tools in the back seat of a 4 door that in a coupe. Just rip the base of the rear seat out and you will have heaps of room!!

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3514996
Share on other sites

Insurance does have the 4 door R32 on their system.

Mine was insured through AAMI.

true about getting out of the smaller doors.

Seating position is the same in 4 or 2 door.

all 89 and 90 models 2 or 4 door came with the gaybo cloth trim.

funny. I don't I've come across a 91 model R32 yet..

hmmm.

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3516183
Share on other sites

adam - R32 is closer to 1.3tonne.

gts4 is a GTR style 1450kg

now that is of the suck with an RB20

turf the GTSt guards and bonnet for GTR items and you'll claim back half that weight difference.

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3516202
Share on other sites

turf the GTSt guards and bonnet for GTR items and you'll claim back half that weight difference.

89 gtst = 1290kg

92+ gtst = 1320kg

1450 - 1290 = 160

1450 - 1320 = 130

Half those weights as you say would be 80kg - 65kg

you saying the removal of gts4 items and replacing with GTR items will make that kind of difference?

:rofl::D:)

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3516305
Share on other sites

About the insurance thing, they didn't have 4 door 32 GTS-4's. I told them that my car's a GTS-4, but I think it's still put down as a GTSt. I keep calling up for them to change it but they end up changing it to an R31, then back to R32 GTSt. I just gave up.

I feel sorry for my RB20 too. :D It's carrying around 1.5tonne. I think it needs to retire and have a RB30/26 take its position. :rofl:

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3516353
Share on other sites

Half those weights as you say would be 80kg - 65kg

you saying the removal of gts4 items and replacing with GTR items will make that kind of difference?

shaddupayourface i didn't mean take my statement literally :nyaanyaa:

GTS4 4 lyfe nyakuh.

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3519016
Share on other sites

they are both tough.

I have and slide a 2 door but i have also driven and hade a fair slide in a 4 door. if you are not partial to either just buy the best condition one you canfor the money you have to spend.

4 doors are a bit more forgiving to slide as they take a bit longer to get out but are easier to correct. the coupe is always a bit easier to sell and you will get more attention with it. but the 4 door is easier to live with day to day.

50/50 but i voted for the coupe :dry:

Link to comment
https://www.sau.com.au/forums/topic/196335-r32/#findComment-3534887
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...