Jump to content
SAU Community

Recommended Posts

Nissan stock but will most likely cost you more then aftermarket.

TEIN Super Streets are suitable, Height adjustable for daily-(driveway) or drop it for a cruise/spirited drive. Also can soften up damper so not too harsh a ride even though it aint too harsh when set stiff.

They retail for around $1500

Or if you are after decent 2nd hands give me a PM, My mate has some which he took off his car, they would of had approx 50,000km of use.

I replaced mine with KYB Gas - I know Gary will tell you not to get them because they are twin tube, but they are relatively inexpensive.

I think I paid around $300 for fronts and round $250ish for rears? might have changed though since I bought them a while ago.

I did mostly daily driving and also some trackdays. Did the job - Not preaching they are the best - but they worked.

+ 2 for Bilsteins :(

I have had them in my car for over a year. Car was a daily driver when I first got them and was still a good ride.

Id suggest also - with the cars age, doing the springs at same time.

Looks like Bilsteins are the go, group buy price (2005) $486 x 2 = $972 + fitting which is more than I'd hoped but that's cars. It's done 100,000k; the shocks are over it - and the car feels flabby as you'd expect. What I'm aiming for is stock feel or a little bit tighter. For all the goat tracks in Sydney I drive on. Budget is always a factor , the KYB option looks worth exploring. I've had enough experience of Konis & other adjustables to not go there again.

Sydneykid, is the group buy price still valid?

Are the Bilsteins valved for the stock spring rates or the springs in the kits?

Is there a basic type Bilstein for less money?

thanks guys

Z

At 100,000km, it is no surprise if feels flabby - stock shocks in most jhapanese vehicles have a life expectancy of 70,000 kms, and a lot less than 10 years.

The group buy is still valid.

If you do not want to increase the spring rates, but do want less roll, do the shocks to get them working, but invest in a apair of swaybars toreduce the roll. It will increase the driving experience, and detract from the feeling of looseness.

The Bilsteins will handle the stock springs as well as the whiteline springs.

I'd suggest springs too, but it is purely road and driver dependant. If you drive on crap roads, it can be detrimental to up the spring rate. Instead, use swaybars to limit roll without compromising on ride comfort

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...