Jump to content
SAU Community

Recommended Posts

just wondering if anyone knows if the oasis branded falvoured drinks are still sold anywhere and if so where abouts?

i know Dr. Pepper is still sold at ezy plus along with cherry coke and other assorted quirky soft drinks that australia hates but i love

anyone know what happened to oasis thO??

or jolly ranchers for that matter!?

Link to comment
https://www.sau.com.au/forums/topic/197645-oasis-drinks/
Share on other sites

try the pommy lolly shops at gosnells railway markets or the lolly shop at malaga markets they might have it as they sell o/s drinks

Malaga Markets don't sell these unfortunately. :( They stopped selling these ages ago. I bought my last one at the deli shop there about a year ago. So yeah if anyone knows a place that still sells them let us know, but im pretty sure that this product is discontinued and schweppes no longer make them.

Think its goodbye forever ;)

Link to comment
https://www.sau.com.au/forums/topic/197645-oasis-drinks/#findComment-3533627
Share on other sites

you can also get dr pepper from 'best of the british' shops - there is one in riverton forum

and the english sweet shop in the fremantle markets has a little fridge full of cool drinks like cherry vanilla coke.

Edited by Lucy in the Sky
Link to comment
https://www.sau.com.au/forums/topic/197645-oasis-drinks/#findComment-3557374
Share on other sites

  • 2 months later...


  • Latest Posts

    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...