Jump to content
SAU Community

Recommended Posts

Hi guys,

I bought a rb25det engine with box for my S13!!

I am looking for over 500hp for drag strip and everyday car!

I will for the begining that I don't have much money to spend and I also want a safe motor!

Where is the limit of the stock pistons? How much horses can handle with good rich mapping (high 11 afrs?) ?

And where is the limit of the stock rods? How many rpm can handle and how can I avoid any damage of them with my driving?

Can I strengh the rod's limits with changing the bolts with arp? I read somewhere this but please confirm this to me :blush:

I will work with stock cams and head!

The parts I will order are:

Greddy style intake

Q45 throttle body

XS Power top mount manifold (I will increase it strengh with a "help bar" and some extra welds)

JUN Crank Collar

N1 oil pump

Tomei oil gallery ofrice (and I will block one oil feed and I will increase the flow of the oil return)

52mm koyo style cooler

I have fmic from my previous motor with core 600x300x76mm and if you think that it isn't enough I can put a same with 100mm core!

I am from Greece and the climate here is quite hot.

My exhaust is 3"! Enough?

I have walbro fuel pump and as I read I need a fuel pressure regulator because stock of rb can't control the big fuel pressure of the walbro!

555cc injectors and 300zx maf and remapping the stock ecu.

And I will try to buy a twin plate clutch kit instead to buy a single ACT even then I read that act can handle 500hp!

If I will buy a twin plate maybe I will buy

Also I bought a gasket kit to replace everything! Also head gasket I will leave the stock.. what limits it have? I read something for 1.2bar boost!

I don't know yet what turbo to use....!

Garret choices:

GT3076 I think that with this I couldn't go more than 520hp..

GT3582 Garret says 400-600hp according the housing...!

Greedy TD06 25!! At 1.15bar with absolutely stock motor got 500bhp!!

Anyone knows how much more can go with more boost?

Turbonetics GT-K 550!! I love the look of this turbo! :banana: 500-600hp rated!

Also any help with the garret turbos what horsepower you can think that can give with the same boost to compare and with what compressor housing? (1.1-1.2 bar)

Garret's are also cheaper choice!

Also please tell me your comments for my choices, tell me what else I will need and help as much as you can :banana:

Edited by GreeceS13
Link to comment
https://www.sau.com.au/forums/topic/197729-rb25-setup-help-for-over-500hp/
Share on other sites

I dont think 500hp will last long on stock internals, i hope thats a metal head gasket.

At least get forged rods and pistons, and balance the motor.

I would go with a GT35R or a GT3582. With a .82 housing, ur 3 inch will be fine.

You should get the power with standard cams, but i would definately get some minor head work done.

Edited by subzeroR33

500hp at the crank is approx. 270-320rwkw, depending on drive train and friction etc, its way too variable to put a hard and fast figure on the conversion from chp to whp.

But a std motor will handle up to 300rwkw, but when you get to that level its a roll of the dice as to how long your motor will last.

But I don't care what you say, DA is correct, it'll cost you heaps..............its reality, you can't avoid it.

Ok maybe it will cost and more... but I don't ask you tell me how much will cost!

I ask many questions... can anyone reply me please?

Please I need replies in all of my question... they are very important for me..!

Also I need ecu as my tunner said me that it cannot remapping the stock..!

Emanage choice is good? Can I have launch control for drag strip? Can it increase rev limiter (because a friend told me that it cannot)? Also I don't need 300zx maf right? Can I run with only the map sensor or it needs the stock maf?

Edited by GreeceS13

just buy a GTR with the amount of money u have to spend to get the power u need.

"I will for the begining that I don't have much money to spend and I also want a safe motor!"

If you dont have enuff money to spend why u telling people no to tell you about prices. They are being realistic and have obviously gone down this path before. If you dont have 10-15k to spend on the car then why bother even thinking of doing it.

To me it all sounds like a lil kid with a big dream, and then he wakes up with his pants wet.

Im not very good with crank horsepower as it doesnt mean shit to me, but personally i wouldnt bother opening up the engine so your going to save a bit of costs there. If it does go bang rebuild it with forged bits. Personally i dont think you will have any issues with it.

They run 9.1 comp ratio which is nice and high, so in my opinion run a gt3076 (.82) with upgraded injectors, pump etc and a good computer without an afm

A friend here is running 270kws at 14psi on a stock as a rock rb25 so its very doable.

Start off with running that turbo on the standard exhaust housing and i think that should get near your power goals without being that expensive.

Edited by SirRacer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...