Jump to content
SAU Community

Recommended Posts

I've got a 94 white one for sale have a look at my thred

yeah i did mate, you need a picture...i'm not looking at anything straight away as i don't have the funds and still have my other car...

i bought mine 3 months ago. i looked for smoke after 4 grand, kms leaks/ drips under engine/gearbox. paid 21.500 remember when buying a gtr tho there is maintenance maintenance and more maintenance :(

also how much would you expect a stocker r32 GTR to be going for? do you reckon i could pick one up for about 15k?

yes but thats definately towards the low side...

(like anything they vary according to cond etc)

normally around the 20k mark these days i think

If I were to purchase a 32 GTR, I wouldn't look at anything below $21k - $22k.

I'm not saying that there's no GTR under $20k that's good, but there's just a higher chance of them being in need of a rebuild soon, or things need replacing. If you find one for $17k that passes all the major $$ spending test, go right ahead and purchase it!

i bought mine recently for 20k, bargained down from 23k.

for a roadworthy it needed 1 new brake disk(replaced all 4)

and needs the engine mounts gearbox mounts and tailshaft center bearing are on the way out. but nothing to stress about just yet.

all up on the road i spent 21k on it, not including rego etc.

i bought mine recently for 20k, bargained down from 23k.

for a roadworthy it needed 1 new brake disk(replaced all 4)

and needs the engine mounts gearbox mounts and tailshaft center bearing are on the way out. but nothing to stress about just yet.

all up on the road i spent 21k on it, not including rego etc.

i guess thats not overly bad is it...i'm thinkin maybe i should save up a bit more money before i consider buying one...i was hoping i could get out of it for under $20k..but it looks like if i spend under 20 on the car..i'll be spending more on repairs...

My advice is buy private, all the 32 GTRs that I looked at in importers yards for comparison sake when buying mine where absolute crocks of shit. This was at various importer yards around Melbourne, someone like power play imports though usually import quality or reasonable nick cars (but also on the more pricey side of things as well).

http://www.powerplayimports.com/

So checkout the for sale section of this forum and carsales.com.au in the private seller section.

Cheers!

Gagz

PS...The R32 GTR for $27,000 about two fifths of the way down the page is one I was looking at when in the market, looks very neat and probably a pretty good price if you could get them down a grand or two. Good luck in the hunt >_<

http://www.powerplayimports.com/includes/c...php?make=Nissan

Edited by R31 Gagz

i have a mint r32 gtr which i brought over from japan and got a 2000 dollar service done by mercury motosports in brisbane. Body, mechanics, interior are all perfect. Not 1 dent. had a compression test and leakdown test with exactly the same on all 6 cyl. I wouldn't sell mine for less than 22k. Sure you can get them for 17k but parts are not cheap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...