Jump to content
SAU Community

Recommended Posts

If you decide to part it off:

How much for the brembos? What sort of condition are they in.

Also, if your intrested, we could prehaps do a deal for a swap with my standard R32 GTR callipers with cash your way to allow you to still get RWC.

well if it comes to it that you decide to sell parts off of it, i shotgun nismo kit and fuel sender unit and posibly weather shields if you have them.

Cheers,

Simon

hey dude

dont mean anything bad here in anyway but you mentioned you lost your licence, tho the police didnt attend the scene.??

anyways was interested in parts if your going that way

That's okay, I can see it would be confusing. At accident cops, ambulance and maybe fireys were called. Only the ambo's turned up. They took me to casualty since I was in shock and there the cops forced a blood test. I heard nothing for three months, then got a summons. Hence license disappeared. I have it back now, that's long since history.

Seriously, the car is kosher. End of me answering questions about that, if you've got cash to buy it and are concerned about that, come and see me, we can go to the cop shop together and get it checked it out :)

Ok, pics, after a horrendous experience uploading to imageshack. They're fairly big, I thought detail was best.

You can see the worst of the damage above the front passenger wheel where the car spun and hit a brick post, actually knocking the post over. The wheel was pushed under the car, this is where the CV was bent, the control arms folded up, the mag torn up and the strut bent. All those have been replaced. Obviously the quarter panel is a bit of an issue, that's where the contact with the other car happened, the corner of that car. The back of the car shore off a small palm tree, hence the pushing in of the spare tire section a little and the crease vertically up the rear bumper and boot.

EDIT: FYI The quarter panel, I think was about $790 from Nissan when I checked. Don't rely on that - call and check with them, but that's from my vague memory.

dsc00354zi5.th.jpg

dsc00353pd6.th.jpg

dsc00346uz0.th.jpg

dsc00345sw7.th.jpg

dsc00344xp8.th.jpg

dsc00343fn0.th.jpg

dsc00342sr7.th.jpg

dsc00341jd0.th.jpg

dsc00340yk2.th.jpg

dsc00339cn0.th.jpg

dsc00338ac4.th.jpg

dsc00337xo2.th.jpg

dsc00336pk5.th.jpg

dsc00332sb9.th.jpg

dsc00331af4.th.jpg

dsc00330zr7.th.jpg

dsc00329it6.th.jpg

dsc00335ds0.th.jpg

dsc00334kb0.th.jpg

dsc00333dh4.th.jpg

dsc00351fd6.th.jpg

dsc00350pr4.th.jpg

dsc00349rq7.th.jpg

dsc00348cw2.th.jpg

Edited by and_r32

please would you apart the centre console, im after just the plastic centre console, i have bought three so far and they have all lost the clips that clip into the dasboard, like your one looks in pretty good nik, im talking about the console that goes around the three centre gauges,radio all the way down around the gearstick, please let me know, i dont need the ashtray or the cigarette lighter, please will you do it, ill put the money into your account asap if you will apart it for me, but does it have any cracks or any damage what so ever to it, thanks alot mait,

cheers tony

Sorry mate, but if I sell that to you the person who buys the car will likely have to look for one then!

If it comes to parts, it's yours, but that seems pretty unlikely to be honest, sorry.

Right now the entire dash, consoles, everything is all together and in great nick, not going to ruin when I'm trying to sell it!

please would you apart the centre console, im after just the plastic centre console, i have bought three so far and they have all lost the clips that clip into the dasboard, like your one looks in pretty good nik, im talking about the console that goes around the three centre gauges,radio all the way down around the gearstick, please let me know, i dont need the ashtray or the cigarette lighter, please will you do it, ill put the money into your account asap if you will apart it for me, but does it have any cracks or any damage what so ever to it, thanks alot mait,

cheers tony

  • 3 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...