Jump to content
SAU Community

Recommended Posts

im not saying im super supreme (pun?) in anyway but i used to smash alot of stock r32 GTRs on a rollby but would get wasted off the line. but i would start catching up easily, but not enough to call it a victory. normally when i see a GTR i dont bother running off the line. maybe after i beat them real bad on the roll.

this was wen my car was at 250rwkw. so i cant wait to get my gt35 3.0L on the road =]

P.S i would like to explain again i dont think myself as uBur l33t. but just to give u an idea. wat do 32 gtrs output stock?

Edited by R34NRG
im not saying im super supreme (pun?) in anyway but i used to smash alot of stock r32 GTRs on a rollby but would get wasted off the line. but i would start catching up easily, but not enough to call it a victory. normally when i see a GTR i dont bother running off the line. maybe after i beat them real bad on the roll.

this was wen my car was at 250rwkw. so i cant wait to get my gt35 3.0L on the road =]

P.S i would like to explain again i dont think myself as uBur l33t. but just to give u an idea. wat do 32 gtrs output stock?

which drag strip in Melbourne does roll on starts?

which drag strip in Melbourne does roll on starts?

I have certainly never heard of one, which begs the question, how and where is the 'slowest skyline driver' on the road smashing all these R32 GTR's on 'roll by'?

Ive got to be one of the slowest skyline drivers there are. i never ever speed and havnt even done my 1st burnout hahahah (tyres expensive :) )

2nd gear pulls alot harder in rwd mode than awd in my r32 gtr. Feels like an extra 2psi. Cheers!

oh yeah its only noticable in 1st and 2nd gear.. when boosting in 3rd gear it obviously doesn't put much to the front wheels while in awd.. there for making very very little diff.

Edited by gtrboosting

Mine was tested at AutoSalon in 2005.

604awkw on the Sat and 608rwkw on the Sun. Same dyno, just dropped the front shaft and that was it.

not quite, but that difference isnt anything to get major excited about.

It will be less, but not substantially at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...