Jump to content
SAU Community

R32 Gtr 3rd Gear

DVS JEZ
 Share

Recommended Posts

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

driving in sydney traffic slowing down for lights was in 3rd gear went to change to 2nd but couldnt, was jammed in 3rd gear, forced it out with a fair bit of effort, drove back to coast from sydney and 3rd gear crunches like no synchros.

drained gear oil and found the 3 little doobies that hold and align the baulk ring, synchro to the gear.

this doesnt help with the sale of the car,

is this a common problem with GTR boxes?

any one got one for sale?

cheers

Jez

Link to comment
https://www.sau.com.au/forums/topic/198934-r32-gtr-3rd-gear/
Share on other sites
DVS JEZ Grand Master

DVS JEZ

Posted
  • Author
Posted
Saw one recently on sale on e-bay.. have a look.. it was a fair price too!

Its all good now, i scored one with 53,000ks from a front cut for...

$100 HOW GOOD IS THAT.

hoping condition will be excellent as the engine was stock in the front cut.

got the fun job of putting the heavy bstard in now

MrStabby Grand Master

MrStabby

Posted
Posted
Its all good now, i scored one with 53,000ks from a front cut for...

$100 HOW GOOD IS THAT.

As long as its good (at it should be with those ks) that's a great price. From what i've seen they're usually more like $800.

How did you find it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...