Jump to content
SAU Community

Recommended Posts

Hey There,

Got my new engine put in this week, and after a bit of driving around etc i've noticed that sometimes when the revs are low and building up to boost

at about 2500rpm the car stutters a bit and feels like its holding back, then once it gets past there it boogies.

Now, i had a major issue with one of the cams f**king up so one of my old cams was used in the motor as the other was broken, now if the cams were say to be different would this cause the issue? The cams supposably on the new engine were NA ones but im unsure of this as a fact.

The car doesnt really pull hard on 14psi as it used to, it used to throw you back in your seat now the car just seems to pull along the revs?

Also thinking Injectors or fuel pump?

Help! I wanna get this fixed!

Trent

oh ok sorry - so the engine was just put back in the car?

id say something is loose, like a hose clamp, intercooler pipe work, the air vac lines for the actuator etc - something along those lines?

Well its not the gap on the plugs

After a fair bit of reading ive come to the conclusion that its the fuel pump not sending enough to the engine, probably causing it to lean out. The car runs fine when cold but thats when its running rich but as soon as it settles its stuffed.

"Many of you with S13s have probably experienced hesitation on boost which can start to happen when the standard fuel pump is getting old."

I believe thats what my problem is.

Now im estimating that its dangerous to drive the car whilst in this state, i.e fuel pump could break down, or could lean the engine out.

Would i be right saying that?

it will be dangerous for you to give the motor any reason to demand more fuel yes.. like cracked piston spec. putting around not so much the best thing for you to do man is take it to a dyno and get your air/fuel checked out they will be able to tell u if it is leaning out or not, if so extreemly likely tis the fuel pump

what gap and how much boost are you running? I was running 14 psi and I had a stutter even after I put in a new 040 pump and pulled the gap from 1.1 to .8 and it stopped it

Edited by BANGN
  • 2 weeks later...

Car was datalogged today, we found that the timing was out. We also adjusted the teeth so that it was sitting perfectly.

We also changed over to a working CAS which still didnt fix the problem, the timing was jumping around from sitting on 15 to 7/8 up and down. Also tried a few diff coilpacks but we are unsure if they are working correctly.

I'm waiting on my walbro replacement to come back then ill be installing that into the tank see if that fixes the issue, other than that its coil packs/injectors we are thinking.

Anyone able to add some to the situation?

Also, if somone could be nice enuff who lives in the melbournes west to let me borrow there coilpacks for 2 minutes to see if the car runs any better would be appreciated.

For a 180sx SR20 Red Top

Anyone who can help either post or pm me please!

My car does the same sometimes, most likely cause would be either fuel pump or injectors. i have a power fc and when it happens i look at the inj duty and its 100% . It never used to it when i had 550cc in there. Two ways to fix it....

1. Bigger fuel pump, Fuel reg and bigger Injectors and tune.. or

2. Turn the boost down.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...