Jump to content
SAU Community

Recommended Posts

Hellloooo everyone!

Ok guys to go with the new turbo... hopefully getting done VERY soon! I am chasingf after the upgrade fuel pump and injectors... probably will bew going for about 320 rwhp.

I am a bit strapped for cash at the moment and am chasing a reliable yet nicely priced fuel pump thats not noisy! whats the one that coventrys do? bosch is it?

Also what injectors will fit? is it true about the rx7 ones fitting our cars? how much for them?

I'm not interested in a malpassi fuel regulator.

SteveSST - i am getting my turbo from Grant at Performanz, Are you able to get hold of some well priced injectors such as the rx7 ones and fuel pump if so i will get you to install everything....

ideas anyone???

Link to comment
https://www.sau.com.au/forums/topic/19915-fuel-pump-and-injectors-upgrade/
Share on other sites

Yeah but where do i get fuel pump from and how much??

injectors will be maxing out around 300 rwhp so even with ecu still need new injectors. which ones are good and well priced... not interested in fuel reg... ave now heard of lots of probs with them....

Call Robert Butler on 9276 0111. This guy knows Bosch pumps inside out.. I got prices for the 044 (800hp and a bit noisy) for my car @ $375. The 040 which does 102ltr/hour is $260...

The 910 does 126ltr/hour is $193.75.

Just remember if you ring anyone up looking for bosch pumps you have to have 0 580 254 (***) before the pump model. EG 0 580 254 044 for the 044 obviously..

Hope this helps...

Brett

Dan

As Brett said the bosch pumps are sweet. I had the 910 in my R33 and will be putting one in my WRX, only thing Dan is they are loud. So maybe you should look at a Walbro pump, they are quieter.

Daniel

cool, any ideas on the walbro pump? how much and where do i get them from?

Oh also Dan did you get your bosch from coventry's in morley?

If so i will ring up coventrys and ask for bosch fuel pump 0 580 254 910

$193 aint bad for a pump..

Why is the 040 more expensive than the 910 when it pumps less petrol? any reason in particular?

Do you guys recon the injectors will last at 320ish rwhp? just spoke to Grant at performanz and he said he has seen some doing 370rwhp on standard injectors! YAY!!

Yes, coventry's morley....

I think the 910 is cheaper because of its shear size and age. They are bloody big and have been around for many years (just an opinion not a conclusive answer).

Dan I have also heard that stock injectors start maxing out around the 300hp mark, so 370 sounds a little excessive.

Daniel

Cool fuel pump sorted.. thanks for that Lads, (Dan,Brett,Dave) Will give conventrys a call ASAP and pick it up on Friday!

Now injectors and I am done.... anyone have any ideas... i do have the Apex ITC (Ignition Timing controller) so injectors should be ok Dave, if i did go the rx7 injectors then how much and what is a good fuel rail?

any other ideas on the injectors situation?? i am just worried about pistons going wrongs if fuel management is not sorted out 100% there is no way i can afford forgies right now i don't want to risk things going wrong when having a more powerful turbo...

going for the hi flow.... 16psi should be ok to be running it on yeah? or is 14psi more engine friendly... keep in mind guys even though my car has been in shows it is still an every day driver and needs longevity!

Dan,

I just bought a set of Sard 700cc's from greenline and they were pretty good compared to most other jap brands. Not sure of the price on RX7 injectors but Bosch make some good ones too I'm told but you need resistors etc to get them to work properly. Are you running standard ecu with the add ons like the ITC?? For my own piece of mind I'd be upgrading to something a little more 'secure'...

Car sounds like it'll rip even harder now..

Brett

Sorry to hijack the thread for a sec but does the 910 fit in the standard fuel pump mount?

When fitting a bigger pump do you need to take into account surge tanks or anything? If not - I'm buying one of these babys this week! :)

Now injectors and I am done.... anyone have any ideas... i do have the Apex ITC (Ignition Timing controller) so injectors should be ok Dave, if i did go the rx7 injectors then how much and what is a good fuel rail?  

a timing controller aint gunnah help you control your injectors...

the 910 is a good choice, and yes cam it does fit in the std bracket with a bit of modification. youve got to worry about low/hish impedance when looking at rx7/rx3 injectors. a mate of mine with a VL put these in his car, and just driving around for a few days before tuning ruined his engine as the injectors were spraying so much fuel it glazed the bores.

25GTT, I'd go for Walbro pump if noise is a concern. They are drop in replcements (or close to) for upto 255L/hr. Prices compareable or better than Bosch pumps.

When you talk about power goals, can you translate it into power at the engine... I don't understand rear wheel figures. If 320rwhp is all you want, I have a dyno sheet of a 25t on stock injectors that does that. Mine. Dyno's differ huge amounts and rear wheel figures are mostly irrelevant.

Stock injectors are good for 370bhp at standard fuel pressure (engine power), or up to ~400bhp if fuel pressure is cranked to the limit. And you'll probably want something a little better than a s-afc to control new injectors with. My advice would be to setup the new turbo on low boost with the stock injectors and bide your time till you can find/afford new injectors and a pfc (if you want >400bhp).

dan/adam - what sort of mods are you talking here? drilling an extra hole or making a new mount to suit? I'd have to install mine myself due to the nature of the stereo in the boot and my distrusting nature... :D

Dan - jiggling? Somehow I just can't imagine you "jiggling".. :D From what you've said it seems like it should be a relatively easy changeover then.

Righto - seems I have a mission for this weekend - fit 910 fuel pump at garage malaga for cool noise and more fuel capacity when I get a regulator.

Thanks for the info. Sorry for hijacking your thread 25GTT.. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...