Jump to content
SAU Community

Options 4 Replacement Of Standard R33 Gtst S2 96 Turbo

mikes

By mikes,
in Forced Induction Performance

 Share

Recommended Posts

mikes Apprentice

mikes

Posted
Posted

Hi guys , just wondering if someone can point me in the right direction...

blown my turbo up... 85% sure of that ...

its stock as far as i know .. i need to replace it but wouldnt mind goin a bit higher in Hp if i can without having to do any other major work...

what are my options here ??

and what is the standard Horsepower of a R33 running say 12psi on a standard turbo... with 3.5 straight through exhaust, FMIC, POD filter , remapped computer chip,

basically i want to be able to bolt on a new turbo with no fuss and possibly gain some horsepower without straining the setup to much.. any ideas ??

thx in advance

mike

Link to comment
Share on other sites
33drifter Collaborator

33drifter

Posted
Posted (edited)

i went for the hks gtrs, straight bolt on. i have similar mods to you and am getting 275rwkw, go to nengun or greenline for the best prices but there is a few weeks wait on delivery.

the gtrs has more lag than a high flow so i depends on what your using it for. had i known just how much lag was involved i would have probably gone with the high flow option but none the less i am very happy with the gtrs and highly recommend it

Edited by 33drifter
Link to comment
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Hi Mike.

I see your new to the forum.

Please checkout the sticky threads in this section.

The Dyno results & FI Guide are the two main ones you need to read.

They cover all the basic mods, upgrades and the respect results.

Take the time to search also if you don't understand something, basic bolt-on upgrades are well covered on this forum

Cheers

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • funkymonkey
      R32 Nostalgia

      By funkymonkey · Posted

      100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • r32-25t
      Bolt dress up kit

      By r32-25t · Posted

      They sell them in Malaysia for about $4
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...