Jump to content
SAU Community

Recommended Posts

Hi guys

Just wondering if anyone knows how to wire up the xf throttle body with a vl manual TPS

My car being a auto originally i have two connectors. Just wanting to know which one do i use to the connect the TPS to it.

Any diagrams or explanations or steps would be much appreciated.

THanks

Link to comment
https://www.sau.com.au/forums/topic/200019-xf-tb-wiring-insturctions/
Share on other sites

on skylines manuals and auto's both have 2 plugs for the tps. one is apart of the plastic tps moulding and the other is on the end of a short length of cable coming out of the tps unit.

the one on the length of cable is the variable tps output. usually 3 wires, 5v input, ground and variable voltage output. (from memory the middle one on the plug is the output)

the one that is apart of the plastic tps moulding is the throttle on/off switch. usually 2 wires, just a switched, on/off voltage.

Edited by QWK32

I have converted my skyline to manual and have obtained a TPS from a vl manual commodore which has only one connector( does not have the additional wire and connector as on the automatic vl)

Just need to know how to splice in the existing skyline loom to the manual vl tps connector.

i was looking at those billet ones but dont trust them. plus being 250 bucks or whatever they are, and could have the possiblity of getting a poorly made one could stuff everything up .

Xf throttle body being 20 bucks, and knowing that they work. I dont think you can go wrong. Yes they were made in 1972 or whenever and from a shit car ( who cares).

Just wiring issues at the moment but if i find the right information, its not going to be hard to have it sorted.

I have converted my skyline to manual and have obtained a TPS from a vl manual commodore which has only one connector( does not have the additional wire and connector as on the automatic vl)

Just need to know how to splice in the existing skyline loom to the manual vl tps connector.

oh ok, didnt notice that in your first post you said it was a vl manual tps. what ecu are you running? you wont be able to use the manual vl tps with a stock ecu, auto or manual.

the manual vl tps only has the on/off switch, when the throttle is closed the switch is closed. just do a continuity test on the pins until you find the ones that switch.

i was just going by what other people have said that works with the xf throttle body.

I didnt think the standard one would work.

I think i have lost the standard one, i have tried finding it but dont know where i put it. i'll have to keep hunting around, and see it would work.

  • 3 months later...

people that are running the XF throttle body,

do you guys have the air bleeder thing on it which you can adjust or not?

I have one that doesnt have it on it? could this affect idle ? (hoping that ya know what im talkiing about.)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...