Jump to content
SAU Community

Video Footage From 2007 Driftfest Of Hypergear's S13.5 Silvia

hypergear

By hypergear,
in General Automotive Discussion

 Share

Recommended Posts

hypergear Grand Master

hypergear

Posted
Posted

2007 Drift Fest. HyperGear TR43 powered CA18det S13.5 in car footage. The car's running 220KWs wheels on 15PSI with 695Nm of torque. (This power is not much compare to RB25 and RB26s, But it is not bad for a CA18det).

Part 1:

Part2:

Out car footage. (Its the Red S15 / S13 with black bonnet. I also included some nice sliding actions from other drivers)

Part 1:

Part2:

GTAAAH Mentor

GTAAAH

Posted
Posted (edited)

that falcon was going off haha, i reckon it was one of the best drivers on the course, guy wasn't exactly worried about stacking the car either.. there was a vn and a eb(?) out there as well, driving around in a group, all doing pretty well.. the falcon had some suspension work tho i rkn..

The judges were judging crappily imo ..one of the guys who got into the final's was a complete knacker and could hardly keep the back out lol

Edited by GTAAAH
Simon-S14 Grand Master

Simon-S14

Posted
Posted

not bad, he's got a few bad habits happening tho, so a few tips his way would be less straight line handbraking, as you can clearly tell that its not locking up too well, so more of a flick and handbrake to enter would be a good thing for him to start practicing

needs some more rear grip big time too, thing is skating 4th... and its a ca lol

all in all, keep up the good work

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...