Jump to content
SAU Community

Recommended Posts

Meat

Eggs

Vegetables

Bread

Milk

Water

That's all you need to know, Dan. Really. And don't look on the back of the pack, just consume big amounts of them...you'll get it right.

I think I'm done in this section of the forum.

All the best.

You post elsewhere? Or is that a forum rage quit?

sorry about the grammar I need to learn engrish and stop trying to focus on 13 things at once.

haha it's all good :P was just like uhhh....dafuq is this trying to say :unsure:

lol tell Troy to EAD

NO U

Meat

Eggs

Vegetables

Bread

Milk

Water

That's all you need to know, Dan. Really. And don't look on the back of the back, just consume big amounts of them...you'll get it right.

You post elsewhere? Or is that a forum rage quit?

Don't wanna start another argument lol, but perhaps don't push bread too much even though it works for you :P there's MUCH better carbs to have in its place. Hell, even regular potato ;)

haha it's all good :P was just like uhhh....dafuq is this trying to say :unsure:

NO U

Don't wanna start another argument lol, but perhaps don't push bread too much even though it works for you :P there's MUCH better carbs to have in its place. Hell, even regular potato ;)

f**k ya, not everyone here is a girl...and you gotta have something to put your lunchtime meats in.

f**k ya, not everyone here is a girl...and you gotta have something to put your lunchtime meats in.

That's what I've got ya mum for, nigga.

Troy: I love breads, I don't eat a heap but f**k me do I enjoy them when I do.

Bread zombie... Graaaaaaaaaaaaains.

I like bread too (well, only really goat bread lol)....but if we want more carbs, there's much more nutritionally useful sources :P

From the desk of Glenn Pendlay

back when i had 22" arms and neck, a guy would ask "what should i do to get big" and i would tell him... then 3 months later see him doing stupid crap... and he would say something like "my training partner said we werent doing enough arms, so we changed this, i didnt feel a pump so we changed that, i was worried i would lose my abs so we ate like this, my moms second removed cousin said you can get huge guns if you do this, etc" and there is the guy, couple of years later, weighing a 160 with 15 inch arms...

frustrating till you learn to just ignore it.

glenn

And by the way, good food means lots of meat, lots of veggies, prefferably veggies cooked in olive oil, then carbs (potatoes, bread, etc) added in amounts sufficient to support you bodyweight goals.

That means, if you want to lose weight, meat and veggies, large quantities of both, and little or no carb rich foods, and train hard. If you want to maintain weight, again, large amounts of meat and veggies, and a bit of carbs, and train hard.

and if you want to gain weight, fill up on meat and veggies, then freaking stuff yourself on bread and potatoes.

It aint that hard.

glenn

I'm not saying bread will work against you; not at all. Just saying you can eat other things with plenty of carbs that actually give you vitamins and shit too lol. Not saying avoid the carbs (like I usually do :P), just suggesting bread isn't the best source.

I'll just be here eating my homemade pizza for lunch.

Ham, salami, red n green capiscum, mushroom, pineapples and mixed herbs.

Awwww YIS

Edit: Forgot to mention the CHEESE

Edited by ActionDan

I'll just be here eating my homemade pizza for lunch.

Ham, salami, red n green capiscum, mushroom, pineapples and mixed herbs.

Awwww YIS

Edit: Forgot to mention the CHEESE

sliced potato, sliced pumpkin, red onion, kalamata olives, feta, olive oil, herbs. Can add salami or something if you wish, but for a vego pizza this thing is so satisfying.

Yours looks amaze though! Loving capsicum on/in everything I eat lately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...