Jump to content
SAU Community

Recommended Posts

well you've got them now so might as well use them - it is amusing how much their articles shill them though.

I will be using them, sorted out my timetable:10am and 3pm mag 10, plazma before and during workout and mag 10 straight after workout and before bed

What's it meant to do?

Mag-10 is used for protein pulsing, (science based dosing strategy for making the body hyper responsive to high protein utilization and producing maximum anabolic effect) which is achieved by three to four amino acid spikes per day.

Plazma contains di and tripeptides and carbohydrate complex to increase metabolic rate and create a pump effect. It stimulates enhanced muscle responsiveness and is also used post workout for recovery

I swear these unsubstantiated marketing claims prey on people (and scientists as an extension) not fully knowing how the body actually works

I feel like their marketing department would be ten times the manpower of their r&d guy / dog

If it wasn't for the Hype and support from companies that have a financial interest most supplements wouldn't make it off the shelves.

As for protein loading.

From my research and personal experience here is some stuff to mull over and critique.

Have your high protein diet for 3 weeks, then cut out all of your extra protein supps for 1 week (I do this on my deload week), then after that week go back to your high protein diet.

The idea is your body is use to high protein, then it get gets starved for it, then it gets it again, your body then goes into starvation mode and stores the extra protein in your body, rinse and repeat.

I've read that people cycle their protein and do 6 on 1 off or other combos.

The science behind it is from AIDS and cancer patients that needed to keep adding weight, they used the old bad diet routine of how people diet for 3 weeks good then lose it for a week and end up gaining weight in the long run.

But then I'm $ure that the $upplement companie$ know what they are doing.

Hmmm, reminds me of "Power thirst".

I swear these unsubstantiated marketing claims prey on people (and scientists as an extension) not fully knowing how the body actually works

I feel like their marketing department would be ten times the manpower of their r&d guy / dog

T Nation have been shat on before for their BS marketing claims on their supplements. It's unfortunate because they have some legit authors with good articles, but then post idiots who write the polar opposite and all of the product placement stuff really detracts from the website.

SinistaGTR's Sent me a pm I have some question

To asked you about Nismo Led tail lights. Thanks

Take 5 grams of Nismo led tail lights morning and night for best results.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...